Thread: KP2 issues...
View Single Post
Old 09-08-2012, 11:46 AM   #10 (permalink)
MCB Member
c6quad's Avatar
Join Date: Apr 2006
Location: NC

yeah, if you didn't replace that face seal that's your problem. do as Smiley says with the empty 12 gram and dowels to get the chamber plug out. sometimes you have to hit it hard to break it loose. the important part is once it breaks loose, pull the 12 gram out and use a smaller dowel to get it the rest of the way out. the 12 gram will only allow the chamber plug to move about a half inch before the 12 gram bottoms out against the valve core. if you keep hitting you'll damage the core and you'll have a major problem then.
Originally Posted by chlsnk View Post
"Go ahead and strip and cut that puppy down because all you are doing is making mine worth more"
Originally Posted by DSA View Post
Ok choochie, the duck is not troubled, it's dated. The technology is old, it's like 8mm stop motion film reels, nothing will ever replace them, they are nostalgic one of a kind but for today's youth the expectations are CGI.
my feedback
c6quad is offline   Reply With Quote