View Single Post
Old 11-01-2012, 11:58 PM   #25 (permalink)
Rage 01
MCB Member
Rage 01's Avatar
Join Date: Oct 2008
Location: Calgary - Canada

To be able to use a remote adapter you need to have a 12 gram in the front of the TPX. If I wanted to run a 12 gram from the remote line setup, that would defeat the purpose. It would equalize both 12 grams and I would get about 5 shots. It took a little to figure out how to fix that. What I did was take the hollow brass tube out and replace it with a solid piece so NO air would go to the from 12 gram. Now that I got that finished. I wanted to put some sort of mag well and mag on it. I looked all over for one but could not find one. So off to the hobby shop I went. I bought some sheet plastic and custom made a mag well and mag, then sprayed it flat black. It took me about 2 hours to get it right. I figured a good sniper rifle needs a scope. On a TPX there is nothing to attach any sort of scope on it. I drilled and taped the top of the shroud to fit mini weaver rail on it. The stock was next on the agenda.
Attached Images
File Type: jpeg plastic for mag.jpeg (29.5 KB, 338 views)
File Type: jpeg mag well and mag.jpeg (36.2 KB, 338 views)
File Type: jpeg Rail.jpeg (42.1 KB, 339 views)
File Type: jpeg tpx rail attached.jpeg (42.2 KB, 338 views)
File Type: jpeg ready to put back together.jpeg (48.2 KB, 338 views)
M. Carter Brown FEEDBACK

Last edited by Rage 01; 11-02-2012 at 12:05 AM.
Rage 01 is offline   Reply With Quote