View Single Post
Old 11-10-2012, 01:22 PM   #22 (permalink)
AKA "BlackGates-5"
short304's Avatar
Join Date: Jan 2011
Location: the 303

Originally Posted by Birdfoot View Post
What do you guys find is the best way to take the bucket changer off? I need to take mine off to check for the shims under the pierce pin.
The 12gr bucket adaptor stuck in the vert ASA? - a strap wrench (i think that's what it's called); it's a rubber strap pipe wrench like what you use to change an oil filter only smaller

Also, if you're having an issue with the 12gr not piercing, you can use a 113 size standard o-ring in the bottom of the bucket changer to put the 12ie an extra 1/16-ish of an inch higher in the bucket; it works well as a simple fix for non-piercing 12ie's and it doesn't fall out when you change 12ie's
Originally Posted by DSA View Post
I thought I smelled Similac on your breath at D-Day Captain Short

My Feedback:

Last edited by short304; 11-10-2012 at 01:26 PM.
short304 is offline   Reply With Quote