View Single Post
Old 12-08-2012, 01:03 AM   #3 (permalink)
Active Member
Jebs04's Avatar
Join Date: Feb 2011
Location: Walton, KY

Brass and Wood Fan
Kilt Club
The Pro Shop one has an issue if the set screw that holds it on the rail that attaches to the bottom of the grip. If you do tighten it to much and it is on the seam for the front part of the ASA were it comes apart it will break the seal and leak, then you will have to replace the housing. As long as you are paying attention to were you are tightening the set screw it is not an issue... However I have not had any issues with all of my 5 pro shop ASA Regulators.. However there is nothing wrong with the ASA and external regulator, some older e bolt kits came that way. Then you can use a Palmers rock reg!
Markers Owned Currently: 200ish
Facebook Page For General Paintball Museum
Jebs04 is offline   Reply With Quote