View Single Post
Old 12-09-2012, 08:51 AM   #6 (permalink)
ironnerd88
Four-eyed Freak
 
ironnerd88's Avatar
 
Join Date: Apr 2006
Location: Atlanta, GA

I have a set of Nelson springs - I WAS missing a couple, but I got a full set from BACCI.

But there are spring companies out there that will make the spring you specify, if you ask nicely and can afford them... They are just music-wire, but of differing wire diameters and coils-per-inch, and since Bacci had them, I didn't feel the need to go down the road of re-inventing the nelson spring.

I do, however, have a CCI Phantom power tube in the old Reb - so who knows if my spring setup will work on any other guns. I mat have a phantom PT, but I have a much heavier hammer, so this should be mostly interesting to get set up.
__________________
"Sorry, I'm programmed to do that..."

Last edited by ironnerd88; 12-09-2012 at 09:18 AM.
ironnerd88 is offline   Reply With Quote