IIRC the DYE Reflex was the 2k3 model, it has slightly different milling. The following from another thread explains.
only things I'm really looking for are a HP cocker valve, or maybe a hammer 7 or some other first strike setup.
Originally Posted by shadawg
Not a reflex...
reflex's started in 2k3 had milling by feedneck that matches the milling on back of body and back block.
This is a 2k2 Dye Autococker
Also that is a wgp reg.
you can see the difference in the two here
The top body is a Dye Reflex, the bottom is the 2k2 dye Autococker: