View Single Post
Old 02-13-2013, 08:49 PM   #6 (permalink)
MCB Member
jellyghost's Avatar
Join Date: Jul 2012
Location: KCMO

Originally Posted by Justus View Post
There's an o-ring that fits on the brass powertube tip to make sure it seals when you screw it down. Then there's an o-ring that sits behind the brass spacer inside the powertube. Those should be the only o-rings you have.

If it's still leaking after you checked both of those o-rings for wear and nicks, inside and out, then you might need to adjust your spacer. I believe one of the more common sizes is .220, but they vary in increments of .005. If you only have the one spacer, hit Tunaman up for a spacer kit.
Thank you! I had the orings as you described, but when I reread my post, I realized it was unclear. I will contact Tunaman. Does a leak imply a longer or shorter spacer?
My Feedback
jellyghost is offline   Reply With Quote