Can't wait to try this out at the scenario this weekend!
It's a BB gun scope, 4x32. The rail is off an old Trracer and I ran a stock TPX bolt through it and put the nut inside the clamshells where the small clear plastic piece was. On the back I just have it secured with a ziptie which will hopefully last me through the scenario. I was going to use a 2nd bolt but there isn't enough room in the back half of the clamshell. I may move it to the barrel block and then add a long rail on top to move the scope back.
I also want to put my A-5 folding stock on it.