View Single Post
Old 03-24-2013, 09:30 PM   #1 (permalink)
maggot
I like Guns and Cigars.
 
maggot's Avatar
 
Join Date: Jul 2008
Location: MO

SLPS Super Light Pump Stroke - Sniper and Cocker spring kits



Introductory price: $12 shipped (Only $10 for each additional kit!)

Introducing the all new Super Light Pump Stroke (SLPS) spring kits. These lightened springs will reduce the amount of force needed to re-cock your pump or Autococker. A lighter pump stroke means more accurate follow up shots and auto-triggering. These springs are significantly softer than any of the springs found in the other spring kits.
How do they work? The key to the system is the lightened valve spring. A lighter valve spring means less force necessary to push the valve open and release the same amount of air. Since less force is needed, you can also use a lighter hammer spring which results in less force needed to re-cock.
You no longer need to purchase an expensive set of new internals to lighten your pump stroke. During my testing the biggest gains resulted on markers using stock WGP internals! Markers using stock internals had 20% to 25% reductions in the force needed to re-cock. You may even see gains in markers using high end internals. For instance, my sniper with an AKA valve and the very light yellow hammer spring had an 11.5% reduction in pump stroke using the SLPS spring kit.
These tests were performed by measuring the FPS and force needed to re-cock on various snipers. Then the springs were replaced with SLPS springs and adjusted to shoot the same FPS without any changes to the air pressure. Once the same FPS was achieved I measured the force needed to re-cock.


What is included: a brand new SLPS spring kit with replacement valve and hammer springs.
You need an Autococker valve tool to install the kit. You can purchase one here for $12 if you don't already have one: WGP Auto Cocker Valve Tool [WGPvlvtool] - $12.00 : Celanis Paintball, Online Store
Installation: Install the SLPS valve and hammer spring. If you are unable to achieve the desired FPS using this spring, re-install the stock hammer spring and leave your IVG most of the way backed out. Lowering your input pressure will often improve efficiency and help you achieve the proper FPS.
Note: the proper term for cocker pumps is snipers. Snipers are not to be confused with the new Empire sniper which uses a Spyder style valve. These springs will NOT work on Empire Snipers or Trilogy series Autocockers.
__________________


Otter Customs Paintball - - - - Straight Up Cigars - - - - My Feedback

Last edited by maggot; 04-30-2014 at 09:12 AM.
maggot is offline