View Single Post
Old 05-09-2013, 11:18 PM   #16 (permalink)
doctercookie
Newbie
 
Join Date: May 2013

Quote:
Originally Posted by pbalien73 View Post
If it doesnt change anything then the hammer has been opening the valve and slamming against the valve retaining screw. It sure could be the problem if air is getting dumped out of the valve/barrel because of the hammer setting on the valve stem. I would do this:
1. Look for leaks
2. Change springs out (valve med/soft, hammer soft)
3. Set main reg to 275psi ( and then sweet spot it)
i just backed out the IVG and it still is going through air like crazy
doctercookie is offline   Reply With Quote