View Single Post
Old 06-27-2013, 10:28 AM   #1 (permalink)
Gay boy with a Gun!
Tyler_vanvoorthuijse's Avatar
Join Date: Sep 2006
Location: F L O R I D A

Brass N Wood Fan
Freeflow (?) RF pre-2k cocker question

This came to me by way of a friend. He said he though it was a Freeflow from way back in the day.

Valve has an o-ring on the stem that looks like its designed to reduce air leakage into the hammer train. Hammer has 2 nylon set screws, one for hammer lug, other for cocking rod. Cocking rod is also unusual, as you can see. has one side set screw, rod appears to travel completely through the nut. Barrel I also haven't seen before. It doesn't wanna come apart. I'd estimate bore at .687 or so based on the paint I have here. The rear bore is tighter than the forward bore. When it came to me, it had a set screw blocking off the front block air passage (Sniper 3 conversion?). Frame is a composite frame. Bolt is an SS, dual o-ring, venturi (looks the same as the STO bolts).

Any help with ID/price point would be appreciated.
TWINK of 1st Canadian Paratroopers, Commonwealth International Paintball Team

Originally Posted by Jebus View Post
Originally Posted by Tyler_vanvoorthuijse View Post
I gave into the rainbow side long ago...
I laughed beer out of my nose upon realizing you are a gay boy with a gun with that comment. Thanks, you owe me some beer.

Selling these:
PACS Works Cocker
Russian Legion Shocker frame/snatch/asa, SFT internals, Air tank, Freak tip
Brass Abomination
Mag Parts!
Tyler_vanvoorthuijse is online now   Reply With Quote