View Single Post
Old 07-13-2013, 05:43 PM   #5 (permalink)
Join Date: Aug 2007

Was thinking of doing this to my S5RF, going to add a hidden second guide rod to the back block for sure though.

There are a couple ways to do custom ICS without modifying critical parts too much, my current favorite being a puller sleeve retained to unmodified back block with a screw, the sleeve fits inside the mainspring and requires a bored out IVG, and a purpose made cocking rod. Can be done the other way around too (sleeve on hammer). I prefer the first method because it makes disassembly and maintenance easier.

Last edited by ApoC_101; 07-13-2013 at 05:51 PM.
ApoC_101 is offline   Reply With Quote