View Single Post
Old 08-22-2013, 07:29 PM   #1 (permalink)
Evil Omen Techmaster
ogti9g9's Avatar
Join Date: Nov 2010

07 PMR solenoid venting.

Alright, this pmr has been working well for a few years now. Replaced the battery/microswitch harness and since I did that, it's been venting from the noid.

It will hold enough pressure for the bolt to go forward half way in the breech and come back, and it won't leak. However, it won't send the ball down the barrel. When I raise the hpr, it starts venting from the noid area.

The higher input, the larger the vent.

What do I need to do?
Originally Posted by Riot View Post
Step 1: plant trees
Step 2: wait
No bunkers necessary, and your yard will look lovely!
Originally Posted by TehSpiff View Post
so i super durped and there was no oring on the top i dont know why i though there was lol

Now that i have said that on the internet it will never be forgotten X_X
Originally Posted by moonweasel View Post
48 weeks.
Hang your head in shame, you missed it. It was magnificent.
10 hail Chads and caress the nearest paintball gun in penitence.
ogti9g9 is offline   Reply With Quote