Ok, so here's the update with a few more additions. I found some nice grips that would work so I didn't have to make my own. I still need to hollow out part of the grips, but that's a quick job for the dremel. A rear cocking bolt from a cocker, although I'm gonna get something other than blue for the pull cap. I sanded down the trigger some more, then I closed off the side bolt opening with an old top dovetail rail from another old spyder, then put another on top to work with the feedtube i'm gonna set up. Lastly, i gotta get my air fittings. The local shop is still out, so i've gotta wait for those. It should be done within the week though. I'll have her up and running completely by next weekend.
Here are the links for the pics:
http://i252.photobucket.com/albums/h...gs/pistol3.jpg http://i252.photobucket.com/albums/h...gs/pistol2.jpg http://i252.photobucket.com/albums/h...gs/pistol1.jpg
I included an open shot of the grip for railgun to take a look at. Tell me what you think of it so far. I'm proud of it!
