Quote:
Originally Posted by Moosepatrol  Okay ANS 3-way, found some o-rings from a hydraulic house nearby. Slightly larger thickness, but I.D. is the same. I think I'll have to break down and buy a kit from the manufacturer. I am wondering about the friction of a slightly larger o-ring in the three way. How sensitive is a three way to even the slightest bit from something like this. Also was on the ANS site, they have a similar three way for 12.95, would I be better off just to get a brand new one, and if so mine being a '97 do I have to look for any specific 3-way, are they compatible? |
With the exception of the backblock and bolt, and the front block and screw, every Cocker part, aftermarket or stock, will fit any year Cocker.
So yes, any 3-way will fit and work on any year Cocker.
I would suggest another 3-way, as the WGP parts kit is roughly $40-$50, and a 3-way is, as you discovered, VERY cheap.
The kit is handy if you plan to rebuild anything on your Cocker, but the majority of the o-rings are for the stock parts, and may not fit aftermarket equipment.
Jordan