| doglb:
The gun has metal body, but some key parts are made from plastic (cylinder including his gearing, his transmitting bar, cylinder lock spring). That gun is nice, but honestly, only cheap build.
howling phantom:
Most of chronos can read reliably even small .177 cal BB penlets. Paint diameter has in reallity no influence on readings on good chrono... and the values are on all accounts not biased with the paint size/weight. For 3357... the 300 fps velocity limit was supposed for .68" cal paint on the basis of his weight and surface area. Because the .50 cal paint has half of his surface area and only two and half of his weight, the 3357 should have in reallity 475 fps safety limit with the .50 cal paint. But most of paintball players and field operators do not know and understand that :-(. And even the Spotmarker valve is not able go for these velocities without mods and adjusting of the velocity - in the stock condition, the velocity is set deep below 300 fps... where is on the other side its efficiency great - drop out after 48-52. shoot.
__________________
LPPC member #173
PGPOG member #671
SCP member #2158
|