View Single Post
Old 09-25-2006, 11:41 PM   #4 (permalink)
pwpaintball
Gun Hoarder
 
pwpaintball's Avatar
 
Join Date: Jun 2006
Location: MA
Send a message via AIM to pwpaintball

I would degas the gun do the cocking rod in the hammer and feel if you are opening the valve or not. Most likely you will need a reg on it. I used ANS valves and they would not work over 500psi. If you are using a P/E high pressure tank your out put is in the 800 to 900psi range.
As for a reg you need to get something with low out put like in the 200 to 300psi range. CP reg, ANS, Dye, Bob Long
__________________
Quote:
Originally Posted by El Gringo View Post
I am not a gun whore, I am a gun HOARDER
My Sale

My Feedback
pwpaintball is offline   Reply With Quote