Quote:
Originally Posted by xkpxfatassxx  Woah, that's great news. rainman said you should enlarge the hole in which the main guide rod goes in. |
Thats if you tighten all 3 screws. The 2 top holes are actually .020 off. on the high side. The coding was right. The machine was way off. If one screw is left loose it will not effect it and would solve the problem of drilling. But being this is a product I'm putting my name on. I didn't find it right to do that. So i drilled the handle and tightened all the screws.
Rainman