Quote:
Originally Posted by Duzzy  If you're talking about the CCM Feeds they're actually 4 pieces.
If you talking about putting a Phantom 1 piece on a CCM marker, the front hole spacing is off. Or so I was told. Although the guys at Wevo would know better than I. |
Duzzy,
Our SS-25 SC feeds were actually modified CCI Hroizontal feed blocks, you just needed a smaller screw with a spacer washer for the front hole and there was a second hole milled for secure attachment to the existing feedneck holes.
Good looking marker Duzzy.
Don't make me break out #001
