| ||Thread Tools||Search this Thread|
|07-27-2010, 10:45 AM||#12 (permalink)|
Formerly known as DMex
Join Date: Jul 2009
Location: Glen Burnie, MD.
You can use just about anything really to fab a new bumper. RTV, rubber hose, a thin foam sheet, leather, etc. As for your bolt foamie. Don't worry about it. It isn't necessary. If you want to glue it back on you need to make sure it's 100% free of oil and scar up the surface before you do it or it'll just pop right off again.
I've personally used epoxy with great results.
Super glue works but just for a little while, same with rubber cement and contact glue.
Last edited by Ando; 07-27-2010 at 10:48 AM.
|07-28-2010, 08:48 PM||#13 (permalink)|
Join Date: Aug 2008
Location: Vancouver Canada
Mine will go full auto if theres to much air pressure. I usually run at 900 psi but if I go to 1050 or higher it will go full auto. Have you changed HPA bottles?
|09-20-2010, 06:23 PM||#15 (permalink)|
Not a Squatch...
Okay, so since my last post I tried to take my mag to the field again and It started acting up once again, going full auto when the trigger was held.
Anyways, today I was playing around with trying to get my mag up and running again and went through and replaced each o ring one at a time. Eventually I ended up replacing the reg piston o ring and problem solved. I just went out a shot a hopper through it and she shot ropes.
Just thought I would update in case anybody has a similar problem in the future.
|Thread Tools||Search this Thread|