-   Air Gun Designs (
-   -   boo ya questions (

biojuggernaut 04-07-2007 09:28 AM

boo ya questions
I currently -MIGHT- be in a transaction for an x valved ule mag with a boo ya trigger frame. Although I have never seen, or even researched the boo ya frame, I have heard many reports of faulty electronics. Although I would much rather take a hyper-frame, the seller isnt selling a hyper-frame so please do not sugest that. The owner of the mag will -hopefully (if everything turns out ok)- be giving me the x valve (with the gun) but not tuned to the bolt or the trigger.

The bolt is no problem as I will problly (sorry for my awful spelling) be sending it off to scott to be tuned anyways. But what do I need to buy for the valve to be able to use the trigger. A new on/off? A new pin? Im afraid if I use to small of a pin I could possibly damage my sear, or bolt (as show in a hyper-frame article on Are there any further accesories for the boo ya trigger frame to get it to "optimal" proformance? Charger, batteries, etc.

My last question will be protaining to my recently purchase gold micro emag. :evilgrin:
Where can I buy a 12 volt wall charger to charge the battery? I saw a pic of one with a radio shack label, if I "can" use one from radio shack does any one currently know the "item number" of the charger needed?

Thanks for your time, and consideration.

AGDRetro 04-07-2007 01:04 PM

You should be able to use the RT Pro On/Off with no problems. This is stock on the X-Valve, too. I believe using the stock Classic On/Off was what caused a good bit of the problems with the first Hyperframes, Centerflag than came out with their own On/Off to fix the problem, but the RT Pro part is nearly identical (if not better) and should be your fix.

As for the E-Mag charger, you should be able to use a Radio Shack one, do a search for the correct version over on AO. You could always buy straight from AGD or Tunaman ( if they keep them on hand...

biojuggernaut 04-07-2007 01:52 PM

Hey thanks. :D

All times are GMT -4. The time now is 04:43 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC