Paintball

[aerosaaber]

I just remembered that my standard high pressure ninja (like 800 or 850) did rt a little bit before I got the ULT, more after the ULT but the 1200 reg definitely does it more freely!

[wins mag]

trigger frames effect rts benchmarks not good intelliframe are great I think 900psi is a minimum depending on flow

[chopper duke]

Originally Posted by wins mag

trigger frames effect rts benchmarks not good intelliframe are great I think 900psi is a minimum depending on flow

[guardian]

Originally Posted by BigEvil

Have you tried the new Crossfires yet? Im very tempted to buy one.

So far I've found the new Crossfire to be just as good as the old

Originally Posted by wins mag

trigger frames effect rts benchmarks not good intelliframe are great I think 900psi is a minimum depending on flow

I beg to differ about the benchmark frames . I've gotten insane (but controllable) reactivity with the above mentioned crossfire reg , benchmark frame and a .728 pin in the on/off .

And from my observations , volume of air flowing into valve does have a little affect on reactivity , but you still got to have a fast recharging tank reg for fast RT'ing .

[wins mag]

I have not tried different on/off pins but I have several rt valves and an intelliframe and benchmark frame and with the on/off pin that came in my valves my benchmark frame will not rt at all even with my 1100psi ninja reg but I never really tried to make it as the intelliframe rips with that reg and valve as is

[secretweaponevan]

Originally Posted by wins mag

I have not tried different on/off pins but I have several rt valves and an intelliframe and benchmark frame and with the on/off pin that came in my valves my benchmark frame will not rt at all even with my 1100psi ninja reg but I never really tried to make it as the intelliframe rips with that reg and valve as is

Single or double trigger on your Benchy?

[russc]

As pointed out above, bottle recharge is a huge factor. Crossfires are fantastic for RTing at regular 850psi pressures. Pure Energy tanks are bunk and should be avoided.

[wins mag]

I've only tried my double benchy I was able to get it to rt by makeing the trigger rod longer but the safety no longer works and i would assume its bad for the sear. I've been playing around more with my rts and found my brothers max flow made my mags rt at less than 900psi while my flatline needs to output over 1100psi so i would say those of you saying recharge rate of the tank reg makes the most difference are dead on. Also I have not been able to find a sweet spot where the gun rts at a reasonable rate I had always assumed it was real fast or nothing.

[Schmitti]

wins mag.... Start using punctuation. It's your friend!!!!! Your last post was a heck of a lot better than the previous ones.

E

[mouscacha]

Lol!