Paintball

[Litespeed]

Originally Posted by going_home

There is no way I'd spend 75.00 on a level 10 when you can get an Xvalve with the level 10 already installed on it on Ebay for 175.00 to 225.00 . Just upgrade the valve. You can get a used one maybe even cheaper than those prices .
Or trade for one. People will sometimes do partial trades for the higher dollar items.

Now I agree I would not spend 75 for a L10, and I haven't, but I did buy them for my classic Pneumag.

I did not need a Xvalve in it, never will, and that is cheaper than a new valve combo.

Now, if you have a standard classic I would not bother anyway.

[Chess13]

lvl 10 worked great for me though i have noticed the air hog part so I got a new 68/4500 tank so that made the cost a little more.

[sdawg]

I got a level 10 because 1) I don't like dealing with broken paint in the breech; 2) I had read so much about the wonder of glory of the level 10, I wanted to see how it works and if I could install it myself, and 3) it's my $65. :P

[Uranus]

I put one in my Classic RT, it didn't seem to hard to install. I got it for 50 ish from a member here. I love it

[Rayodder]

Level 10 took a little bit of time to tune it, if you don't have chronograph.

Took awhile to get the mag to stop leaking down the barrel, than when I took it to the shop to get it chron'ed it was only shooting at 130FPS, most of the time the leak is cause by lack of pressure not a wrong size carrier o ring.