Help Me Out Here - Page 2

Robertsr · 05-13-2008, 10:52 PM

Sorry, had to give the daughter a bath. My preggers wife is getting too big to bend in the middle.

That's a Gen 3 Micro in Wild Tiger anno. It would be dated somewhere between '96 and '99.

Wild Tiger is one of the more rare anno's out there, but you only have the matched ASA, not the gas though, the drop forward, or the vert adapter. Also, the trigger guard has been cut which guts the price pretty badly. I sold my Gen 2 Wild Tiger with an intact trigger guard for $185.00 a few years back. Given the current market on Micro's I wouldn't pay much more for it than that regardless of the rarity of the anno.

Does it have a MicroMag branded valve? If not the price dips a couple of sawbacks for the rabid collector market.

Here was mine with an intelliframe and a gas-though in gloss black, just to prove that you can still be manly and run a girly colored gun.

711 · 05-13-2008, 11:17 PM

So how much should I try and get this for?

711 · 05-13-2008, 11:31 PM

Figure while I got this thread up I'll get a little more help. Been looking around some more and found this one...

^So what's the deal?

Robertsr · 05-13-2008, 11:36 PM

Personally, I'd talk down the cut guard and the missing vert adapter like it was the end of the world and start at $150.00 for the Micro. Who knows, there aren't a lot of folks who are familiar with them, so you might get lucky. I wouldn't pay more than $200 for it in it's current condition myself, and I'm somewhat known for probably paying too much for these things sometimes.

As far as the other mag, it's a stock classic with a powerfeed and a Dye? barrel...

My guess would be $100.00-$120.00 ish, maybe even less given the radical drop we've seen in the classic market lately.

711 · 05-13-2008, 11:45 PM

Ok, thanks for the help. I'll keep ya updated, and post any other questions or concerns if the arise.

Robertsr · 05-13-2008, 11:47 PM

Good luck on both! Mags are great pieces of equipment no matter what body they're in.

b-cuzz · 05-14-2008, 10:47 PM

It'd be hard for me to pass up that micro. Robertsr is right on the price, though. If you're new to mags, I'd recommend the micro, simply because it takes 'cocker threads and it's a great deal easier to find barrels for....

Just a thought. Good luck!!!

05-13-2008, 10:52 PM	#11 (permalink)
Robertsr King of the OFG Join Date: Apr 2006 Location: Waynesboro, VA	Sorry, had to give the daughter a bath. My preggers wife is getting too big to bend in the middle. That's a Gen 3 Micro in Wild Tiger anno. It would be dated somewhere between '96 and '99. Wild Tiger is one of the more rare anno's out there, but you only have the matched ASA, not the gas though, the drop forward, or the vert adapter. Also, the trigger guard has been cut which guts the price pretty badly. I sold my Gen 2 Wild Tiger with an intact trigger guard for $185.00 a few years back. Given the current market on Micro's I wouldn't pay much more for it than that regardless of the rarity of the anno. Does it have a MicroMag branded valve? If not the price dips a couple of sawbacks for the rabid collector market. Here was mine with an intelliframe and a gas-though in gloss black, just to prove that you can still be manly and run a girly colored gun. __________________ MicroMags 'R Us

05-13-2008, 11:36 PM	#14 (permalink)
Robertsr King of the OFG Join Date: Apr 2006 Location: Waynesboro, VA	Personally, I'd talk down the cut guard and the missing vert adapter like it was the end of the world and start at $150.00 for the Micro. Who knows, there aren't a lot of folks who are familiar with them, so you might get lucky. I wouldn't pay more than $200 for it in it's current condition myself, and I'm somewhat known for probably paying too much for these things sometimes. As far as the other mag, it's a stock classic with a powerfeed and a Dye? barrel... My guess would be $100.00-$120.00 ish, maybe even less given the radical drop we've seen in the classic market lately. __________________ MicroMags 'R Us

05-13-2008, 11:47 PM	#16 (permalink)
Robertsr King of the OFG Join Date: Apr 2006 Location: Waynesboro, VA	Good luck on both! Mags are great pieces of equipment no matter what body they're in. __________________ MicroMags 'R Us

05-14-2008, 10:47 PM	#17 (permalink)
b-cuzz MCB Member Join Date: Feb 2008 Location: Nevada, Missouri	It'd be hard for me to pass up that micro. Robertsr is right on the price, though. If you're new to mags, I'd recommend the micro, simply because it takes 'cocker threads and it's a great deal easier to find barrels for.... Just a thought. Good luck!!! __________________ Worm 4 insists it's personal. "Our doubts are traitors, and make us lose the good we oft might win, by fearing to attempt". -William Shakespeare My feedback: http://www.mcarterbrown.com/forums/f...-feedback.html My weapons: http://www.mcarterbrown.com/gallery/...rsenal&cat=500

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-13-2008, 11:17 PM	#12 (permalink)
711 Seasoned Member Join Date: Jan 2008 Location: SoCal	So how much should I try and get this for?

05-13-2008, 11:31 PM	#13 (permalink)
711 Seasoned Member Join Date: Jan 2008 Location: SoCal	Figure while I got this thread up I'll get a little more help. Been looking around some more and found this one... ^So what's the deal?

05-13-2008, 11:45 PM	#15 (permalink)
711 Seasoned Member Join Date: Jan 2008 Location: SoCal	Ok, thanks for the help. I'll keep ya updated, and post any other questions or concerns if the arise.