Mag frame swap?

hvacman250 · 08-05-2008, 07:32 PM

Trying to learn this stuff....

I have a plastic Mag single trigger frame. Can I put the internals into my 32 Degrees aluminum frame?

Everything looks the same except the plastic frame looks to have a deeper groove than the alum one where the sear will hit the trigger.

Motorhead · 08-05-2008, 08:45 PM

Should swap right over, the safety too

You may have to do a "minor" adjustment to the OAL of the sear rod ?

Clearush · 08-05-2008, 09:01 PM

mag frames don't have anything in them except the trigger, the sear and rod are in the rail.

hvacman250 · 08-05-2008, 09:29 PM

Thanks guys! I went ahead and tried it and it fit with a little filing to the trigger plate. I had to shave a tiny bit off the safety hole or the trigger was binding. Seems to work fine now. I have no body to test it with though.

Is there anywhere I can purchase a metal trigger?

mailmanmike · 08-05-2008, 11:17 PM

couple of metal double triggers on ebay

like this Trigger

a single will be much harder to find

Clearush · 08-05-2008, 11:29 PM

yeah but cutting one of those double's would be real easy.

hvacman250 · 08-06-2008, 12:22 AM

Quote:

Originally Posted by mailmanmike

couple of metal double triggers on ebay

like this Trigger

a single will be much harder to find

I could easily cut that down, but are we sure its metal? It doesnt say.

mailmanmike · 08-06-2008, 11:01 PM

i've only ever seen metal triggers sold like that.

I'm kind of mad that it never occured to me last night to just cut the double down.....

maninblack · 08-08-2008, 03:15 PM

Quote:

Originally Posted by hvacman250

I could easily cut that down, but are we sure its metal? It doesnt say.

Yes those kind are aluminum. I cut one up the other day.

spawnsharks · 08-08-2008, 03:22 PM

I have one... $10 shipped?

08-05-2008, 07:32 PM	#1 (permalink)
hvacman250 Seasoned Member Join Date: Nov 2006	Mag frame swap? Trying to learn this stuff.... I have a plastic Mag single trigger frame. Can I put the internals into my 32 Degrees aluminum frame? Everything looks the same except the plastic frame looks to have a deeper groove than the alum one where the sear will hit the trigger. __________________ Feedback

08-05-2008, 08:45 PM	#2 (permalink)
Motorhead Seasoned Member Join Date: Jun 2007 Location: Northern California U.S.A.	Should swap right over, the safety too You may have to do a "minor" adjustment to the OAL of the sear rod ? __________________ Older & Slower ... But well armed. Motorheads feedback

08-05-2008, 09:01 PM	#3 (permalink)
Clearush Meatshield Join Date: Mar 2006 Location: HTown, TX	mag frames don't have anything in them except the trigger, the sear and rod are in the rail. __________________ Carter's Commando Texas division Black Watch Scenario Paintball Team My SCP Feedback Ebay Feedback MCB Feedback

08-05-2008, 09:29 PM	#4 (permalink)
hvacman250 Seasoned Member Join Date: Nov 2006	Thanks guys! I went ahead and tried it and it fit with a little filing to the trigger plate. I had to shave a tiny bit off the safety hole or the trigger was binding. Seems to work fine now. I have no body to test it with though. Is there anywhere I can purchase a metal trigger? __________________ Feedback

08-05-2008, 11:17 PM	#5 (permalink)
mailmanmike No Longer a Mailman! Join Date: Aug 2007 Location: pembroke, MA	couple of metal double triggers on ebay like this Trigger a single will be much harder to find __________________ Remember to pillage BEFORE you burn! MCB Feedback Ebay Feedback

08-05-2008, 11:29 PM	#6 (permalink)
Clearush Meatshield Join Date: Mar 2006 Location: HTown, TX	yeah but cutting one of those double's would be real easy. __________________ Carter's Commando Texas division Black Watch Scenario Paintball Team My SCP Feedback Ebay Feedback MCB Feedback

08-06-2008, 11:01 PM	#8 (permalink)
mailmanmike No Longer a Mailman! Join Date: Aug 2007 Location: pembroke, MA	i've only ever seen metal triggers sold like that. I'm kind of mad that it never occured to me last night to just cut the double down..... __________________ Remember to pillage BEFORE you burn! MCB Feedback Ebay Feedback

08-08-2008, 03:22 PM	#10 (permalink)
spawnsharks Newbie Join Date: Feb 2007 Location: San Francisco, CA	I have one... $10 shipped? __________________ Boomerangs are pretty much Frisbees for antisocial kids I don't understand how hitting someone with one of 300 balls, fired at 30BPS is skill.... yet a single ball to the face from a PGP is a "lucky" shot.... My gallery Classic Nickel 15rd PMI-1 for trade... HERE If we've dealt in the past, please leave feedback in my Feedback thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search