Turning down raptor barrel for sterling

matt · 09-01-2008, 01:15 AM

I am going to need a raptor barrel turned down to fit a sterling. Who can do this for me?

kidneythief · 09-01-2008, 03:34 AM

You cant "turn down" a Raptor barrel to fit a Sterling. The Raptor barrels will thread into a Sterling but the throat is too short. You would need a short ring that would fit in between the barrel and the rest of the receiver.

-Jake

jhyan · 09-01-2008, 03:45 AM

Many people have trimmed down the shoulder of raptor barrels by about .25 inch, allowing the end of the barrel to seat against the bore of the sterling body.

splashkitsrock420 · 09-01-2008, 11:52 AM

i have one of these and it works grt i did it my self no spacing at all had to doubble oring the barrel to make it snug from the back of the barrel to the front of the marker

matt · 09-01-2008, 12:24 PM

Quote:

Originally Posted by jhyan

Many people have trimmed down the shoulder of raptor barrels by about .25 inch, allowing the end of the barrel to seat against the bore of the sterling body.

This is what I am asking

kidneythief · 09-01-2008, 10:57 PM

My bad I was thinking the other way around.

PM me.

-Jake

Legion · 09-04-2008, 06:02 PM

i can do it.

09-01-2008, 01:15 AM	#1 (permalink)
matt Active Member Join Date: Jun 2007 Location: Orange County, CA	Turning down raptor barrel for sterling I am going to need a raptor barrel turned down to fit a sterling. Who can do this for me? __________________ Classic Sterling STP for Sale (Vert Feed) Nice Ninja '06 Alien Interceptor MCB Feedback +8/-0 PbN Feedback +69/-0

09-01-2008, 03:34 AM	#2 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!!	You cant "turn down" a Raptor barrel to fit a Sterling. The Raptor barrels will thread into a Sterling but the throat is too short. You would need a short ring that would fit in between the barrel and the rest of the receiver. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) MCB Moderator Kidney Machine

09-01-2008, 11:52 AM	#4 (permalink)
splashkitsrock420 Active Member Join Date: Jul 2007	barrel i have one of these and it works grt i did it my self no spacing at all had to doubble oring the barrel to make it snug from the back of the barrel to the front of the marker

09-01-2008, 10:57 PM	#6 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!!	My bad I was thinking the other way around. PM me. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) MCB Moderator Kidney Machine

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-01-2008, 03:45 AM	#3 (permalink)
jhyan Cheffer Join Date: Apr 2006	Many people have trimmed down the shoulder of raptor barrels by about .25 inch, allowing the end of the barrel to seat against the bore of the sterling body.