Greetings all...
Well some of you may recall my project marker the MedicMag II as shown here:
Parts:
Well I am looking for someone to do some final work to it.
- Firstly, I am looking to have the marker Pnuemagged as I shot it this weekend and while it is nice... I can only get about 8 bps, and I am not much of a fan of the reactive trigger ala 1000psi input. So I am looking for someone who has the tools and the time to do a clean, INTERNAL LPR, DIY conversion.Don't take this the wrong way, but I am NOT looking for some dremmel job that is 'good enough'. I want a very clean and professional install with sharp edges and tight milling (if any at all is required). I have a cybereave pnue-kit and a palmer's micro rock, but I will purchase whatever is necessary to do this job right. I have spent thousands on this marker already, so a few more bucks into the project won't make me too upset.
- Secondly, I am looking for some sort of milled piece to attach my forgrip to the rail. I LOVE the UMF frame, but it will not fit the DW Carbon Fiber foregrip without some significant modification. Again, I am not looking for some dremmel chop job, but a design and milled piece suitable for annodization.
So all you guys with mills and time on your hands, let me know what this type of project will cost, if it can be done, and post up your suggestions and prices.
Responses can be left here, via PM, or by email at
medicdvg@gmail.com.
Thanks in advance,
Medic
09-01-2008, 10:24 PM
My Feedback:
