new to my viking...

Nobody · 06-09-2008, 11:09 PM

seen them

, shot one

, wanted one

, and now i've finally got one

. a deal too good to pass up, so i took the plunge and now i'm the new owner of this

(picture is from previous owner)

Full AKA factory Milling
Dust blue

WAS 2.0 board
SCM III Polished exterior
Silver Razor blade
Daimond dust detent cover
CCM feedneck
AKA bolt pin
Nickle sidewinder
polished data port covers.
Custom silver grip panels
stock Javalin barrel
mitemax

its not coming with the CP and rail, so that's going to change. so what i want to know is:
1) care and maintainance
2) how to use the WAS board
3) tips, tricks and other info
4) what to expect when you are waiting for your new to you Viking
5) mods and opinions
6) "potpourri"

my intentions are to use it for the better part of this year and then get enough together and find out what i want DC to mill to it. think more of a diet with the hidden milling as well as a few other cuts. then to change the colour, haven't decided on that either, but i don't care for the dust of this, but it might be from the picture. so please, any and all opinions, facts and biases are welcome here.

Mouse · 06-09-2008, 11:15 PM

I sold mine, now I want it back, have fun with her!
Mouse

himurax13 · 06-10-2008, 01:45 AM

1. Keep the exterior clean and add 3 drops of oil to the ASA every case or so. You can add 1 or 2 drops to the bolt as well.
2. Check out wickedairsportz.com
3. There are a few but the most important are grips, a decent trigger job, and a good bottomline setup.
4. Expect? A gun that is out of the ordinary than can keep up or surpass the current offering of markers.
5. You have enough, you could get a different trigger, board, or the Robtown Valve.
6. You can get it milled an re-annoed.

greenmtnphantom · 06-10-2008, 08:28 AM

Congrats! never part with it you will regret it.

My suggestion would be at the end of this season or if you can stand the wait now send it out to DC for a check up, I did that with mine knowing nothing about them, and I thought it shot well before I sent it out but now it's just plain cherry!

I'll also second trying to find a trigger you like.

06-09-2008, 11:09 PM	#1 (permalink)
Nobody Active Member Join Date: May 2007 Posts: 269	new to my viking... seen them , shot one , wanted one , and now i've finally got one . a deal too good to pass up, so i took the plunge and now i'm the new owner of this (picture is from previous owner) Full AKA factory Milling Dust blue WAS 2.0 board SCM III Polished exterior Silver Razor blade Daimond dust detent cover CCM feedneck AKA bolt pin Nickle sidewinder polished data port covers. Custom silver grip panels stock Javalin barrel mitemax its not coming with the CP and rail, so that's going to change. so what i want to know is: 1) care and maintainance 2) how to use the WAS board 3) tips, tricks and other info 4) what to expect when you are waiting for your new to you Viking 5) mods and opinions 6) "potpourri" my intentions are to use it for the better part of this year and then get enough together and find out what i want DC to mill to it. think more of a diet with the hidden milling as well as a few other cuts. then to change the colour, haven't decided on that either, but i don't care for the dust of this, but it might be from the picture. so please, any and all opinions, facts and biases are welcome here.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-09-2008, 11:15 PM	#2 (permalink)
Mouse Active Member Join Date: Oct 2007 Posts: 155	I sold mine, now I want it back, have fun with her! Mouse