|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|05-15-2012, 06:07 PM||#11 (permalink)|
2 Infinity and Beyond!
Join Date: Apr 2008
Location: Vail, AZ
It has been done just like you are probably trying to do. I can't get pictures and I didn't do it, but I have seen pictures of an Empire Trracer with that mod.
|05-15-2012, 06:13 PM||#12 (permalink)|
Join Date: Jun 2009
Sweet if i come accross pics or who did it point them this direction
If you want to talk email me.
PS3 network: Keebler1337
Aka "wagz" on the field
|05-15-2012, 07:05 PM||#13 (permalink)|
Join Date: Oct 2007
Location: A2, Michigan
I've always wondered if there isn't some cheating going on and if some of the holes / fittings / plugs used aren't actually NPS. Some just don't seem to have much taper.
|05-15-2012, 07:46 PM||#14 (permalink)|
There is very little taper in NPT threads but it is there. Its hard to see unless your used to looking for subtle differences in things. I deal with machining tolerances in the +-.0005" range so i can see very small size variations pretty easily. I would not want to try to pit a normal thread into a NPT hole, it would not work out very well and would likely ruin both pieces. There is only like. 020" taper in the 1/8" NPT taps i have which is like 4x the thickness of a piece of paper.
|Thread Tools||Search this Thread|