|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|12-09-2012, 04:16 PM||#1 (permalink)|
Join Date: Apr 2006
Location: S. Windsor, CT
Phantom Feed tube queston
Without having to fully make one where would one get the feed adapter that you put a sock holder in to keep the balls from rolling out. Looks like some sort of conical reducer on the end of the Phantom feed tube. Don't want to use a lens cover. If need be I can call Mike Cassady but trying to be innovative.
I need it to be aluminum to fit on the tubes I am milling.
Everyone loves jumping up and down in muddy puddles.
It pays to be insane.
Last edited by TouchofGrey; 12-09-2012 at 04:17 PM. Reason: data
|12-09-2012, 04:17 PM||#2 (permalink)|
Walking without rhythm
Just call mike...
they are only about $6...and not worth the hassle of trying to reproduce your self...
If you really want to though, try a rubber foot from a stool or cane.
|12-09-2012, 11:35 PM||#4 (permalink)|
Join Date: Sep 2008
Location: Chattanooga, TN
Retainers here: Amazon.com: SockLocks: Home & Kitchen
As for the plastic bit, the ones I've made started out as 1"-3/4" PVC reducers.
If you use a dremel to carve a recessed trench inside the lip of the coupler the natural springiness of the sock ring (or CCI ring) will keep it from popping out of place.
The blue one I made first, many years ago, and overestimated how deep I needed to dig the trench, which is why it looks damaged.
|Thread Tools||Search this Thread|