- - noid question
|Spider! ||02-13-2013 01:53 PM |
I don't know for sure, but the trilogy seemed to have all standard threading, so I would expect 10-32 barbs. That would be easy to check with an ASA mounting screw or automag body screw.
If the noid is particularly asian or euro, it may be M3 threads. Have you tried googling the model number? You might be able to find the specs for it.
|Nobody ||02-13-2013 01:54 PM |
i'd assume its a M3, if it isn't stated. that is the standard, just about.check out airsoldier.com(where you should be getting the barbs anyway) and see if Have Blue has a datasheet with the info there.
|superman ||02-13-2013 03:05 PM |
Anyone have the model number? Pretty sure it's not 10-32
|Nobody ||02-13-2013 07:53 PM |
go to airsolder.com and go through the listing or match up the picture you have with the pictures listed.
|superman ||02-14-2013 09:04 AM |
its not on there i checked last time when i tried to buy the noid, and again just now.
|Spider! ||02-14-2013 05:45 PM |
Do you have the solenoid in hand, or just planning on getting one?
|superman ||02-14-2013 06:44 PM |
in hand but the number but the number is rubbed off
|Spider! ||02-14-2013 10:41 PM |
Do you have a decent hardware store nearby? You could get an M3 screw and try that.
|superman ||02-14-2013 10:59 PM |
ya ill give that a try
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC