mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Ask The Experts (http://www.mcarterbrown.com/forums/ask-experts/)
-   -   How would I go about re rounding the inside of a barrel? (http://www.mcarterbrown.com/forums/ask-experts/230718-how-would-i-go-about-re-rounding-inside-barrel.html)

ogti9g9 04-06-2013 01:07 AM

How would I go about re rounding the inside of a barrel?
 
I've got an angel barrel that has a small dent on the back of the barrel where it threads into the body. This causes chopping every once in a while, and I'm not to sure on how to fix it.

redlaser666 04-06-2013 01:35 AM

If it is on the edge you can use a tapered dowel.

K_Obeastly 04-07-2013 05:46 AM

sometimes a socket can work as well though it will most likely ruin the anno in that spot. Just got to find a socket that narrows at the end and wont drop all the way in the barrel.


All times are GMT -4. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC