|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|05-17-2013, 12:51 PM||#1 (permalink)|
HP Cocker Valve Question
Hey, So I figuring out my setup for a pre2k pump cocker with HP valve. It runs great off 12grams, but I want to be able to change it over to CA on the fly. My current thought is to run a remote line from the VA.
I'm wondering if my SP Dye Throttle HPA tank is HP enough to run the valve without problems or if I should just run the remote to a CO2 tank. I would only be running the tank reg, no HPR if I used HPA.
edit: and where the hell do you all buy your ten round tubes? lol
Dust Black/Silver Evil Pimp Kit.
Blue NDZ on/off, Blue CP Shorty HPR, Venom Customs Blade Trigger, NDZ Locking Feedneck, Kila Mag Detents
Dust Red/Chrome Evil Pimp Kit
Evil Detonator HPR, Machette On/Off, Stock Trigger w/ Spring, Matrix Detent Mod/Detents, Kila Eye Covers, Kila Grips, Chrome Evil Smokestack
Dangerous Power Dark Earth Threshold- Black CP HPR
AGD Classic Mag - Intelliframe, Benchmark rail/forgrip, Shocktech drop/ASA.
Azodin KP2 2011 - Stock
A/C - Evil Pipe Kit (Gloss Black/Silver), Lucker .678, CP .691 (Dust Black). Bob Long Assasins .689
Impulse - Evil Pipe Kit (Gloss Black/Silver), 14inch Pipe (Dust Black/Silver), Redz Pepperstick .689
Last edited by 99BPS; 05-17-2013 at 12:57 PM.
|05-17-2013, 01:30 PM||#2 (permalink)|
Join Date: Nov 2012
Location: New England
You should be fine running a stock older cocker off an HPA only reg and taking off the on-gun reg... considering most HPA regs are designed to output about that pressure... You may need to adjust your hammer spring a bit though.
That said, dual regs are a benefit as long as they have enough 'buffer' room (like at least 100psi difference between them IMO) to recharge quickly.
2k1 Homebuilt Auto-Cocker
TiPX + Zetamags
|05-17-2013, 02:53 PM||#3 (permalink)|
GMO Population control
Join Date: Jan 2008
Location: Under a De Facto government
Celani's paintball is the best place to get 12ies and ten round tubes. Tituspb.com.
|Thread Tools||Search this Thread|