How to take out the safety on a sheridan frame?

P4p3Rc1iP · 03-29-2008, 08:38 AM

Like the title says, how do you take out the safety on a Sheridan frame? I have a Piranah LB that I want to install an AT kit on, but I can't seem to get the safety out.

I've taken out both of the pins holding the sear and the trigger in place, but the trigger itself won't come out because the safety is in the way, and I suspect the safety won't come out because the trigger is in the way?

So, how do I do this?

P4p3Rc1iP · 03-29-2008, 08:40 AM

Oh wow, nevermind, just after I wrote the above, I turned the safety pin a bit, and was able to pull it out with a pair of pliers!

Thanks though!

SpinDoctor15 · 03-29-2008, 02:56 PM

Which way did it come out? Toward the side with the red indicator? Or toward the thicker side? I can't seem to get mine out either, the frame is extremely corroded and the trigger is stuck solid too...

MrBig · 03-29-2008, 05:10 PM

I don't think it matter which side, but I tend to take my out of the thicker side. You need to push the trigger back into the frame a little and twist the safety. It should slide out. You may need to convince it a little with some slight taps if the frame is that corroded.

03-29-2008, 08:38 AM	#1 (permalink)
P4p3Rc1iP Active Member Join Date: Aug 2006 Location: Leeuwarden, The Netherlands	How to take out the safety on a sheridan frame? Like the title says, how do you take out the safety on a Sheridan frame? I have a Piranah LB that I want to install an AT kit on, but I can't seem to get the safety out. I've taken out both of the pins holding the sear and the trigger in place, but the trigger itself won't come out because the safety is in the way, and I suspect the safety won't come out because the trigger is in the way? So, how do I do this? __________________

03-29-2008, 08:40 AM	#2 (permalink)
P4p3Rc1iP Active Member Join Date: Aug 2006 Location: Leeuwarden, The Netherlands	Oh wow, nevermind, just after I wrote the above, I turned the safety pin a bit, and was able to pull it out with a pair of pliers! Thanks though! __________________

03-29-2008, 02:56 PM	#3 (permalink)
SpinDoctor15 a.k.a. FullSpinPaintball Join Date: Apr 2006 Location: Los Angeles, CA	Which way did it come out? Toward the side with the red indicator? Or toward the thicker side? I can't seem to get mine out either, the frame is extremely corroded and the trigger is stuck solid too... __________________ Jason Spin Doc Spin Doctor's Paintball Page MCB Feedback PBN Feedback PBN Feedback (old) Agglet re: Frink: "Much like a newborn baby your collection is both beautiful and disgusting." russc: "PBN is a business, and that's why they prefer thousands of morons to hundreds of intelligent posters" drum: "Between the ammo shipments and all the long rectangular packages, not to mention regular mail from the Pa. Superior Court, my mailman is pretty sure that I am a freak."

03-29-2008, 05:10 PM	#4 (permalink)
MrBig MCB Member Join Date: Apr 2006 Location: East Lansing, MI	I don't think it matter which side, but I tend to take my out of the thicker side. You need to push the trigger back into the frame a little and twist the safety. It should slide out. You may need to convince it a little with some slight taps if the frame is that corroded. __________________ Over 100 Items For Sale Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search