Trracer/Maverick powertubes?

SilentDeath12886 · 07-03-2008, 08:24 PM

Will other nelson based powertubes work in the Trracer/mavericks? Are all collars to the same dimensions in terms of threading? Particularly phantom powertubes.

I want to get a powertube which extends to the bolt because it seems that the air will just escape out the side of my Trracer/maverick. It is a non adjuable and there is no tube between the bolt or hammer.

I saw a couple of trracer/maverick hammers on here, but they all lack the forward tube in the hammer, so I was thinking of using just any powertube to run through the hammer.

Clearush · 07-04-2008, 12:51 AM

It depends the hammer that comes with the stubby power tube usualy has the tube out the front of it going into the bolt, the hole in the center of this hammer is to small to accept a standard nelson power tube. There are hammers made for trracers that accept the standard nelson power tubes.

SilentDeath12886 · 07-04-2008, 01:58 AM

Will nelson PTs and hammer combos work with a Maverick trigger frame? in orders words will it be able to disengage the sear. That is just one of many issues I am currently having. Trigger will not disengage sear.

Clearush · 07-04-2008, 01:14 PM

I do not believe that a nelson hammer will fit at least the one I had did not fit.

07-03-2008, 08:24 PM	#1 (permalink)
SilentDeath12886 Rec Poster Join Date: Jun 2008 Location: PA	Trracer/Maverick powertubes? Will other nelson based powertubes work in the Trracer/mavericks? Are all collars to the same dimensions in terms of threading? Particularly phantom powertubes. I want to get a powertube which extends to the bolt because it seems that the air will just escape out the side of my Trracer/maverick. It is a non adjuable and there is no tube between the bolt or hammer. I saw a couple of trracer/maverick hammers on here, but they all lack the forward tube in the hammer, so I was thinking of using just any powertube to run through the hammer. Last edited by SilentDeath12886; 07-03-2008 at 10:54 PM..

07-04-2008, 12:51 AM	#2 (permalink)
Clearush Meatshield Join Date: Mar 2006 Location: HTown, TX	It depends the hammer that comes with the stubby power tube usualy has the tube out the front of it going into the bolt, the hole in the center of this hammer is to small to accept a standard nelson power tube. There are hammers made for trracers that accept the standard nelson power tubes. __________________ Carter's Commando Texas division Black Watch Scenario Paintball Team My SCP Feedback Ebay Feedback MCB Feedback

07-04-2008, 01:14 PM	#4 (permalink)
Clearush Meatshield Join Date: Mar 2006 Location: HTown, TX	I do not believe that a nelson hammer will fit at least the one I had did not fit. __________________ Carter's Commando Texas division Black Watch Scenario Paintball Team My SCP Feedback Ebay Feedback MCB Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-04-2008, 01:58 AM	#3 (permalink)
SilentDeath12886 Rec Poster Join Date: Jun 2008 Location: PA	Will nelson PTs and hammer combos work with a Maverick trigger frame? in orders words will it be able to disengage the sear. That is just one of many issues I am currently having. Trigger will not disengage sear.