What is the differance performance wise between a classic and RT valve?
classic valves can use CO2 while RT's can't. the RT's are capable of higher rates of fire and some are able to have a prominent reactivity. Classics normally can operate at up to about 13 bps
The trigger pull on a classic is greater than an RT. Not all classics can use the ULE trigger kit. Increasing the inout pressure to a classic valve doesn't change anything aside from velocity.
That's just off the top of my head. there's probably more...
Prominent Reactivity? is that a "sweet spot" in the trigger?
In regards to performance there are 2 valve types: Classic & RT(including:E-Mag, X-Valve, Retro)
The classic Valve resets the on/off with the regulated air coming from the back end of the valve. The RT Series uses the incoming tank pressure to reset the On/Off.
The result is that the RT Series pushes harder to reset the gun than the clasic, and this effect is magnified the higher your source tank pressure. As you increase the tank pressure the force of the trigger return gets higher and higher. Eventually it pushes enough that you can get a bounce effect with the trigger where if you pull just right it will basically keep firing. This is more of a side effect than a desired design criterea, IIRC.
|All times are GMT -4. The time now is 11:35 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC