|Brass Eagle Brass Eagle owners can hang out here|
| ||Thread Tools||Search this Thread|
|08-28-2013, 06:20 PM||#1 (permalink)|
Join Date: Jul 2013
Raptor not re-cocking
so i have finally got a barrel to test my raptor with thanks to moonweasel.
so i aired it up and fired off about 100 rounds through it relatively fine, velocity seemed to be a bit low but may not be as i dont have a chrono and im just eyeballing it.
however after about 100 rounds it started to fail to re cock, it would just burp and sit uncocked.
my HPA tank was sitting at about 1300 - 1400 PSI
i thought that i had fixed this problem, but apparantly not...
any ideas as to what could be causing this?
i will go and replace all the orings tonight
Last edited by Techie; 08-28-2013 at 06:21 PM. Reason: added PSI
|Thread Tools||Search this Thread|