mcarterbrown.com  

Carter Machine Carter Buzzards, Comps, Mini Comps, Ducks and more!

Reply
 
Thread Tools Search this Thread
Old 07-14-2011, 08:49 AM   #11 (permalink)
starts off small at first
 
splattttttt's Avatar
 
Join Date: Apr 2006
Location: Bean Town, U.S.A.

I started using the Techt Ifit kit with great success on my Mini Comp.
__________________
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill

THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
splattttttt land
splattttttt is offline   Reply With Quote
Old 07-14-2011, 08:29 PM   #12 (permalink)
Gear fanatic.
 
Omega Chief's Avatar
 
Join Date: Apr 2006
Location: Tempe, Arizona
Send a message via AIM to Omega Chief

Quote:
Originally Posted by splattttttt View Post
I started using the Techt Ifit kit with great success on my Mini Comp.
Wow, I've never seen one of those before. Brilliant, it's short enough so the barrel will still be matched to the entire length of the pump, and it will work on other markers.

I have lathe access as well, so if I need to I should be able to cut that carter bevel into it.

Do you think this would be as good an option as the carter inserts? Or even better due to the many sizes? I presume if it works flawlessly on your mini buzzard it should work equally well on the full-size.

Any recommendations where to buy one of these?

Thank you.

Edit: seems the inserts come right to the back of the adapter, so cutting a carter bevel into it would seem unlikely. But it seems to work without? Just a smaller o-ring on the bolt perhaps? And the insert cannot be pulled out the back, preventing the problems people have had with freak inserts. (i would assume)
__________________
Feedback | For Sale: New PE Kneepads

Last edited by Omega Chief; 07-14-2011 at 10:20 PM.
Omega Chief is offline   Reply With Quote
Old 07-16-2011, 08:48 PM   #13 (permalink)
Hawkeye: Finest Kind
 
Marathon's Avatar
 
Join Date: Nov 2009
Location: Suburbs of Toronto

CCM Fan
Quote:
Originally Posted by Omega Chief View Post
Do you find that a freak barrel is not a perfect fit within the pump? Doesn't this deteriorate the pump stroke quality?
I found the barrel outer diameter was nearly identical to the carter barrel that came with the gun. THe pump stroke is excellent with my freak barrel.

***other peoples expirience may differ. Carter guns are all one offs so there may be different tolerances on your gun. ***

I had a kaner barrel on my mini buzzard at first. THe kaner barrel is not flat it is milled out in the middle. I had to put some duct tape on the outer diameter of the barrel to keep the pump arm from rattling around.
__________________
Feedback
M.CarterBrown
Custom Cockers
Marathon is offline   Reply With Quote
Old 09-08-2011, 12:39 AM   #14 (permalink)
Active Member
 
TheCount's Avatar
 
Join Date: Aug 2010
Location: Cleveland, Ohio

Brass N Wood Fan
Palmers Fan
I'm going to resurrect this one to give a possible solution.

This is pretty simple and isn't anything new I'm sure, but I haven't seen it spelled out for us mouth breathers so here we go.

I too have had great success with the freak barrel, however I had issues with the bolt not being able to travel the full distance and therefore the buzzard wouldn't fire correctly, if at all. I was not blessed enough to have the stock barrel, and my gun was basically useless as I didn't have a barrel that worked properly.

I picked up one of the old freak kits, the ones with the fully cylindrical backs, and did this.

Typically, a freak insert sits like this:


This causes the bolt, when fully forward, to sit like this:


This caused a whole host of issues for me. To remedy this I added a bunch of orings to the barrel, ala:


There is an oring where the barrel meets the gun threads, and an extra oring where the back meets the front.

Ergo, the insert sits like this:


and that allows the bolt to come all the way forward:


No rollouts, and the gun fires properly.
__________________
Mein Feedback
TheCount is offline   Reply With Quote
Old 09-08-2011, 12:58 AM   #15 (permalink)
starts off small at first
 
splattttttt's Avatar
 
Join Date: Apr 2006
Location: Bean Town, U.S.A.

brilliant! Avoiding the possabilities of the bolt pulling the insert out is key.
__________________
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill

THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
splattttttt land
splattttttt is offline   Reply With Quote
Old 11-09-2011, 06:39 PM   #16 (permalink)
Active Member
 
figone12's Avatar
 
Join Date: Apr 2006

ok,
have to ask, how do I go about ordering a cater barrel w/ insert? I do not see them on cater site or get on waiting list? Thanks.
figone12 is offline   Reply With Quote
Old 11-09-2011, 07:31 PM   #17 (permalink)
Dive Dive Dive
 
worrptangl's Avatar
 
Join Date: Nov 2006
Location: Back in Da 808

Fan of EMR
CCM Fan
demonio@thosepumpguyz.com
__________________
Quote:
Originally Posted by Talfuchre View Post
I will lock this damned thread up if anyone posts that disgusting picture I saw once.
It like the CCM version of Two Girls One Cup.
I will ban folks.... I swear.
TF

http://www.mcarterbrown.com/forums/f...-feedback.html
worrptangl is online now   Reply With Quote
Old 11-16-2011, 07:48 PM   #18 (permalink)
Olde Basterd#2
 
Feyd's Avatar
 
Join Date: Oct 2008
Location: Combat Zone club 66

CCM Fan
Kilt Fan
I gave this some thought and have two solutions. 1st would be to get the barrel Freaked to the depth of the bevel. Simple yes as well as obvious. 2nd was an idea gleaned from a barrel I saw on E-bay that used an external O-ring as a détente. The way it was done was a groove was machined around the out side of the barrel and the groove was cut all the way through on opposing sides or top and bottom. This aloud the O-ring to actually go into the barrel. Well that got me thinking of just machining the barrel about an inch from the body but not so far as the pump comes any way near it. With a tight O-ring going into the barrel it would keep the Freak in tight. Feyd...........Heres a picture.
__________________

Last edited by Feyd; 11-16-2011 at 07:56 PM.
Feyd is offline   Reply With Quote
Old 11-16-2011, 09:19 PM   #19 (permalink)
My "brother"
 
Julien's Avatar
 
Join Date: Mar 2010
Location: Canada, Vancouver, B.C

CCM Fan
^ that's such a rip off of the tri force system on the Azodin kaos pump.
__________________
willing to trade for everything : http://www.mcarterbrown.com/gallery/...0&ppuser=22872

Quote:
Originally Posted by dark_controller View Post
I am a fag.
Quote:
Originally Posted by dark_controller View Post
thats what happens when i leave mcb up at work.....
Julien is offline   Reply With Quote
Old 11-16-2011, 10:07 PM   #20 (permalink)
Olde Basterd#2
 
Feyd's Avatar
 
Join Date: Oct 2008
Location: Combat Zone club 66

CCM Fan
Kilt Fan
Hadn't seen it before. The picture is gone? Don't know what happened. Feyd.........
__________________
Feyd is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Carter Machine

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:09 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC