Thinking of picking up a phantom need some help

Morfesto · 12-13-2007, 08:46 PM

So I am thinking of getting the following (from wevo) plus a duckslide

Micro Dropout Phantom Pistol in stock!
Black 45 Phantom Micro Dropout Pistol
with matching trigger shoe and 6" barrel = $214.98

I need a few questions answered.

What length of barrel do you need to get for it to be flush with the duckslide?

And I heard that you can fit any grips that would fit an m-16 style is this true?

Also anyone know where I can get the duckslide annoed in slate?

El Gringo · 12-13-2007, 08:59 PM

Are you going to anno the entire gun slate? If you do, call CCI direct and get a raw Phantom so you can anno the whole thing at the same time. Then you can send CCI the trigger frame back and they will laser engraved it so it looks o.g.

Morfesto · 12-13-2007, 09:06 PM

I was thinking of getting the phantom slate from wevo for 20$

Do you think it would be too hard to have the duckslide anno'ed to match?

Rayodder · 12-13-2007, 10:12 PM

Quote:

Originally Posted by Morfesto

I was thinking of getting the phantom slate from wevo for 20$

Do you think it would be too hard to have the duckslide anno'ed to match?

Ideally you want to anno'ed everything in the same batch, so there are no minor variations in shades.

Talk to Wevo and have them ask, if Mike at CCI can throw a raw duckslide in with his next batch of slate.

Morfesto · 12-16-2007, 04:46 PM

Anyone got any answers in regards to these two questions?

What length of barrel do you need to get for it to be flush with the duckslide?

And I heard that you can fit any grips that would fit an m-16 style is this true?

VVulfe · 12-16-2007, 05:19 PM

You'll need a 6" barrel. I'm not sure about the grips.

Shade12 · 12-17-2007, 09:48 AM

I've seen different m16 grips on phantoms so I would assume that you could put them on but I'm not sure.

thkyle · 12-17-2007, 10:26 PM

Just about any M16 - AR15 grip will fit. Some might need some minor sanding fitting around the rear thumbscrew, but the Phantom trigger frame is drilled and tapped to accept M16 style grips.

Also, silver/slate is a hard anno to match even when it's all done in the same batch.

Morfesto · 12-18-2007, 09:17 AM

Thanks for the info guys!

Trying to contact some ppl to get this project started

12-13-2007, 08:46 PM	#1 (permalink)
Morfesto Canuck Join Date: Nov 2007 Location: Ottawa, On. Posts: 354	Thinking of picking up a phantom need some help So I am thinking of getting the following (from wevo) plus a duckslide Micro Dropout Phantom Pistol in stock! Black 45 Phantom Micro Dropout Pistol with matching trigger shoe and 6" barrel = $214.98 I need a few questions answered. What length of barrel do you need to get for it to be flush with the duckslide? And I heard that you can fit any grips that would fit an m-16 style is this true? Also anyone know where I can get the duckslide annoed in slate? __________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt KP2 -- Performance tune and side tube re-addition by Dan Sergison PMI-1 -- Mint

12-13-2007, 08:59 PM	#2 (permalink)
El Gringo Post Whore Join Date: Apr 2006 Posts: 1,837	Are you going to anno the entire gun slate? If you do, call CCI direct and get a raw Phantom so you can anno the whole thing at the same time. Then you can send CCI the trigger frame back and they will laser engraved it so it looks o.g. __________________ ..... Have a Grateful Day! EL Gringo's Feedback Buy my Black Phoon

12-13-2007, 09:06 PM	#3 (permalink)
Morfesto Canuck Join Date: Nov 2007 Location: Ottawa, On. Posts: 354	I was thinking of getting the phantom slate from wevo for 20$ Do you think it would be too hard to have the duckslide anno'ed to match? __________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt KP2 -- Performance tune and side tube re-addition by Dan Sergison PMI-1 -- Mint

12-16-2007, 04:46 PM	#5 (permalink)
Morfesto Canuck Join Date: Nov 2007 Location: Ottawa, On. Posts: 354	Anyone got any answers in regards to these two questions? What length of barrel do you need to get for it to be flush with the duckslide? And I heard that you can fit any grips that would fit an m-16 style is this true? __________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt KP2 -- Performance tune and side tube re-addition by Dan Sergison PMI-1 -- Mint

12-17-2007, 09:48 AM	#7 (permalink)
Shade12 MCB Member Join Date: Sep 2007 Location: Mahwah, NJ Posts: 83	I've seen different m16 grips on phantoms so I would assume that you could put them on but I'm not sure. __________________ The hardest enemy to defeat is the one you cannot find.

12-16-2007, 05:19 PM	#6 (permalink)
VVulfe I Hate This City. Join Date: Sep 2007 Location: New Jersey Posts: 593	You'll need a 6" barrel. I'm not sure about the grips.

12-17-2007, 10:26 PM	#8 (permalink)
thkyle MCB Member Join Date: Sep 2006 Location: Steelers Country Posts: 453	Just about any M16 - AR15 grip will fit. Some might need some minor sanding fitting around the rear thumbscrew, but the Phantom trigger frame is drilled and tapped to accept M16 style grips. Also, silver/slate is a hard anno to match even when it's all done in the same batch.

12-18-2007, 09:17 AM	#9 (permalink)
Morfesto Canuck Join Date: Nov 2007 Location: Ottawa, On. Posts: 354	Thanks for the info guys! Trying to contact some ppl to get this project started __________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt KP2 -- Performance tune and side tube re-addition by Dan Sergison PMI-1 -- Mint

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search