|
             |
 |
|
| CCI Home of the Phantom Pump Gun |
 |
| | LinkBack | Thread Tools | Search this Thread |
04-11-2008, 04:23 PM
| #1 (permalink) |
| Damage Inc.  Join Date: Apr 2006
Posts: 150
|  Dropout valve, but what make? So I picked up a unibody with a dropout valve but it's not tapped for the sight rail. Nor does the anodizing match. I'm wondering if this is from a trrracer or similar nelson clone. 1988 unibody phantom FS/T Any help in identifying it's manufacturer would be appreciated. Jeffrey
__________________ Carpe Noctem! My mouth is clean, my hands are dirty. Heaven isn't on my side. Well if it was, then she'd have hurt me. Didn't think this through... |
|  |
|
04-11-2008, 04:58 PM
| #2 (permalink) |
| Mod-O-Rator  Join Date: Mar 2006 Location: Finleyville, PA
Posts: 7,183
| Razorback? I know razorback valves will fir some trracer retainer threads.
__________________ Bryan "Azzy" Spiegel webmaster - Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 Check out VintageRex.com, the premiere paintball museum "A Patriot and free-thinker with respect to social standards in 1760, is today's traitor and dangerous mind." - incynr8 |
| |
|
04-11-2008, 05:16 PM
| #3 (permalink) |
| nelson fanboy Join Date: Feb 2007 Location: Monmouth, Oregon
Posts: 1,458
  | it came in a parts box with the razorbacks i got from Big Old Skool a while back. its probably a razorback valve body but knob is unmarked, BOS says its compatible with phantom knobs and so on, so it works. the valve retainer is the same as a CCI valve. the phantom;s original backbottle valve went onto a razorback that got sold before the phantom lol.
__________________ nothing like the heft of steel nelspots  |
|
| |
|
04-11-2008, 05:17 PM
| #4 (permalink) |
| Active Member  Join Date: Apr 2006 Location: Southern Indiana
Posts: 428
| Looks to me like the generic TASO drop-outs. They made them for both the Phantom-style valves and the standard Nelson valves. Most have T.A.S.O. or the possum engraved on the knob in the back and had the flat black anodizing. Anonym
__________________ Bleeding Paint and Sweating CO2 since 1988! |
|
| |
|
04-12-2008, 02:06 PM
| #6 (permalink) |
| See Matt Mod.  Join Date: Mar 2006 Location: Bethlehem CT
Posts: 2,745
| That still might be a Phantom drop out. I have one just like it. No tapping on top and kind matte finished compared to the barrel. I wasn't aware that TASO made them for the Phantom too! I'll go look for any distinguishing marks. |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
