|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|11-07-2009, 01:32 PM||#21 (permalink)|
Join Date: May 2008
Location: Oakville, Ontario, Canada
Ok GG iI have another question for you, to get the same velocity with a lighter main spring, you would need to screw the TPC in farther, increasing the tension of the spring. The tension would need to be increased so that it would make the hammer hit the valve with the same force as a heavier mainspring with the TPC farther out. Correct?
So wouldn't a lighter main cause just as much hammer bounce, because it has its tension increased to the same as a heavier spring would have?
|11-08-2009, 08:07 PM||#22 (permalink)|
starts off small at first
Join Date: Apr 2006
Location: Bean Town, U.S.A.
You can use a red Madman, and cut three coils off, and use less input at the TPC, while still maintaining a heavy valve spring. Will add stiffness on the pump stroke, but that's negligible.
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill
THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods. splattttttt land
|Thread Tools||Search this Thread|