CCM frame compatibility question

Riddler · 07-24-2010, 05:54 PM

Hey all,
So the Westwood 'cocker I picked up on Ebay recently is a '97 body, meaning it has the non-threaded IVG that is retained by the beavertail screw. I'm looking at picking up a CCM minicocker AT pump kit for it with the frame and everything, and I know they have the beavertail that threads into the back of the frame, but I can't recall if there's still a screw hole there that will allow me to lock down the IVG. Anyone able to check one of theirs for me?

Thanks in advance!

Slider_68 · 07-24-2010, 06:00 PM

no screw hole, but you might be able to find a set screw that you could lock it down with then put on the frame, But then adjusting would be a pain.

Riddler · 07-24-2010, 06:09 PM

Thanks for the reply!

It would only be disassembly that would potentially be more annoying. The IVG has a fixed external sleeve with an internal worm gear that is adjustable from the back, much like a rex dialer.

Hum, so I guess I'd need a grub screw...

LudavicoSoldier · 07-25-2010, 11:57 AM

Yup! A 10/32 grub screw is what you need!

Julien · 07-25-2010, 01:12 PM

pumping a westwood!?!?

dear mother of god........

it better have come with no pneumatics otherwise velcor will not approve....

Riddler · 07-25-2010, 01:29 PM

it's getting a full rebuild: pneus, some of the internals, and anodizing. i figured i might as well have a pump kit done to match.

the underdog · 07-26-2010, 10:38 AM

Also not to thread-jack, but the title is appropriate for another question as well.

Will the T2 frames fit on a pgp or other rounded gun?

superman · 07-26-2010, 12:26 PM

idk about the pgp question

but for the westwood i would drill a hole so that you could remove the grub enough to dissasemble, would save u some hassle of taking the grip frame off every time.

Riddler · 07-26-2010, 12:59 PM

Quote:

Originally Posted by superman

idk about the pgp question

but for the westwood i would drill a hole so that you could remove the grub enough to dissasemble, would save u some hassle of taking the grip frame off every time.

i may do that, thanks... would definitely want to do it prior to anodizing. will have to look at it first to ensure that the beavertail isn't threaded through that area.

Quote:

Originally Posted by the underdog

Also not to thread-jack, but the title is appropriate for another question as well.

Will the T2 frames fit on a pgp or other rounded gun?

no worries! and i'm sorry, i don't know if the frame holes or sear line up, or if the curve radius is even the same, for that matter.

07-24-2010, 05:54 PM	#1 (permalink)
Riddler MCB Member Join Date: Apr 2006 Location: pgh, pa	CCM frame compatibility question Hey all, So the Westwood 'cocker I picked up on Ebay recently is a '97 body, meaning it has the non-threaded IVG that is retained by the beavertail screw. I'm looking at picking up a CCM minicocker AT pump kit for it with the frame and everything, and I know they have the beavertail that threads into the back of the frame, but I can't recall if there's still a screw hole there that will allow me to lock down the IVG. Anyone able to check one of theirs for me? Thanks in advance! __________________ feedback WTS: Marq Rapper • Desert Fox, Medusa-framed Mag • Apex Elite, Spectre • "BFG" Rainmaker • WALZ "Kit Carson" • 'cocker pneumatic hose WTB: AA Uniregs

07-24-2010, 06:00 PM	#2 (permalink)
Slider_68 Active Member Join Date: Dec 2008 Location: Cookeville, TN	no screw hole, but you might be able to find a set screw that you could lock it down with then put on the frame, But then adjusting would be a pain. __________________ Just cause its new doesn't mean it works.

07-24-2010, 06:09 PM	#3 (permalink)
Riddler MCB Member Join Date: Apr 2006 Location: pgh, pa	Thanks for the reply! It would only be disassembly that would potentially be more annoying. The IVG has a fixed external sleeve with an internal worm gear that is adjustable from the back, much like a rex dialer. Hum, so I guess I'd need a grub screw... __________________ feedback WTS: Marq Rapper • Desert Fox, Medusa-framed Mag • Apex Elite, Spectre • "BFG" Rainmaker • WALZ "Kit Carson" • 'cocker pneumatic hose WTB: AA Uniregs

07-25-2010, 11:57 AM	#4 (permalink)
LudavicoSoldier S.M.I.T.H. Join Date: Jul 2006 Location: Cambridge, MA	Yup! A 10/32 grub screw is what you need! __________________ Dark Lord of The S.M.I.T.H. BPS Twister Sniper BPS Autococker Gallery MCB Feedback Thread

07-25-2010, 01:29 PM	#6 (permalink)
Riddler MCB Member Join Date: Apr 2006 Location: pgh, pa	it's getting a full rebuild: pneus, some of the internals, and anodizing. i figured i might as well have a pump kit done to match. __________________ feedback WTS: Marq Rapper • Desert Fox, Medusa-framed Mag • Apex Elite, Spectre • "BFG" Rainmaker • WALZ "Kit Carson" • 'cocker pneumatic hose WTB: AA Uniregs

07-25-2010, 01:12 PM	#5 (permalink)
Julien My "brother" Join Date: Mar 2010 Location: Canada, Vancouver, B.C	pumping a westwood!?!? dear mother of god........ it better have come with no pneumatics otherwise velcor will not approve....

07-26-2010, 10:38 AM	#7 (permalink)
the underdog Rec Poster Join Date: Jul 2008	Also not to thread-jack, but the title is appropriate for another question as well. Will the T2 frames fit on a pgp or other rounded gun?

07-26-2010, 12:26 PM	#8 (permalink)
superman Post Whore Join Date: Jun 2007 Location: Charleston, SC	idk about the pgp question but for the westwood i would drill a hole so that you could remove the grub enough to dissasemble, would save u some hassle of taking the grip frame off every time. __________________ I buy Automags and Parts: if you need cash shoot me a pm feedback(http://www.mcarterbrown.com/forums/f...-feedback.html)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search