Works internals

Broch · 04-25-2012, 11:20 PM

Im curious to know the difference between works internals and current Chipleys internals. I'm considering a sniper that has them, and I'm trying to figure out if it is sprung like a Chipley.

Thanks for any info!

Inferno · 04-26-2012, 01:06 AM

Springing is the same, internals are almost identical.
Only difference I notice is the works hammer is fluted and has two sets screws (one for the lug one for the cocking rod) and the IVG had one less 1/8 hex key hole. Which are just little things that do not affect anything...

Broch · 04-26-2012, 08:15 AM

Thanks for the info!

Talfuchre · 04-26-2012, 09:00 AM

I want to clarify - the spring seems similar to the S5 S6 springs - not the T2 Springs.

I figured we all knew this - but wanted to be clear.

TF

Broch · 04-26-2012, 11:15 AM

TF, thanks for your input as well! I've not yet shot a T2, but will someday.

Talfuchre · 04-26-2012, 12:11 PM

T2's due to the design of the end cap and the heavier hammer - needed a slightly different spring.

They are not interchangable with S5's and S6's and the like.

TF

Broch · 04-26-2012, 02:43 PM

I did end up buying the Sniper. Way too good of a deal to pass up, and I would have spent a small fortune building on like it.

http://www.mcarterbrown.com/forums/b...aurus-rex.html

04-25-2012, 11:20 PM	#1 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	Works internals Im curious to know the difference between works internals and current Chipleys internals. I'm considering a sniper that has them, and I'm trying to figure out if it is sprung like a Chipley. Thanks for any info! __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

04-26-2012, 01:06 AM	#2 (permalink)
Inferno Pump player Join Date: Sep 2011 Location: Ottawa, Ontario	Springing is the same, internals are almost identical. Only difference I notice is the works hammer is fluted and has two sets screws (one for the lug one for the cocking rod) and the IVG had one less 1/8 hex key hole. Which are just little things that do not affect anything... __________________ Featuring Death!! MY FEEDBACK MY YOUTUBE

04-26-2012, 08:15 AM	#3 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	Thanks for the info! __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

04-26-2012, 09:00 AM	#4 (permalink)
Talfuchre Yellow - Green Join Date: May 2006	I want to clarify - the spring seems similar to the S5 S6 springs - not the T2 Springs. I figured we all knew this - but wanted to be clear. TF __________________ Pumpenstein - NSA National Champions TF's MCB Trust.

04-26-2012, 11:15 AM	#5 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	TF, thanks for your input as well! I've not yet shot a T2, but will someday. __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

04-26-2012, 12:11 PM	#6 (permalink)
Talfuchre Yellow - Green Join Date: May 2006	T2's due to the design of the end cap and the heavier hammer - needed a slightly different spring. They are not interchangable with S5's and S6's and the like. TF __________________ Pumpenstein - NSA National Champions TF's MCB Trust.

04-26-2012, 02:43 PM	#7 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	I did end up buying the Sniper. Way too good of a deal to pass up, and I would have spent a small fortune building on like it. http://www.mcarterbrown.com/forums/b...aurus-rex.html __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search