mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 07-19-2012, 11:12 AM   #1 (permalink)
Active Member
 
bigcanada00's Avatar
 
Join Date: Jul 2006

SS25 AT arm

Had a blast at Pump Pandemonium this weekend but midway through the day my faithful SS25 had a hiccup. The cam was coming loose from the frame and starting to bind against the 86 sliding trigger. Had to remove and go ATless for the rest of the day (even though I didn't really use AT) and the marker, as usual, functioned flawlessly.

I think the many years of wear and tear have done a number on my AT assembly. Can I get only a replacement polished black arm or do I need the whole assembly?

Mine is one of the earlier SS25s (delrin cup seal, 86 frame, etc.) and I'm assuming only newer style components are available for replacement.

bigcanada00 is offline   Reply With Quote
Old 07-19-2012, 01:18 PM   #2 (permalink)
.67cal Buwwets!
 
crazyorigin's Avatar
 
Join Date: Mar 2008
Location: Central Southern Upstate NY

CCM Fan
I am pretty sure dimensionally the new AT arms arecthe same as the older ones. A replacement should be easily available right from CCM. I think there is some in their eBay store.
crazyorigin is offline   Reply With Quote
Old 07-19-2012, 02:06 PM   #3 (permalink)
HI = A Pumper's Paradise
 
808raoul's Avatar
 
Join Date: Apr 2008
Location: Aiea, HI
Send a message via AIM to 808raoul

AKA Fan
I think the 86 slider AT arm is different from the 86 hinge AT arm. I am not sure, I will check when I get home from work.
__________________
MCB Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Anybody gots to sell:
-Line SI Bushmaster Pointman handle
-Racegun Halfblock Backblock (newer ver.)
808raoul is offline   Reply With Quote
Old 07-19-2012, 06:06 PM   #4 (permalink)
Owner of Crazy Cats
 
EgoPossum's Avatar
 
Join Date: Mar 2009
Location: Thunder bay, Ontario, Canada

CCM Fan
Where the flat in the cam sits is different on the 86* cams.
I have one for a CCM slider that was on my 03 J2.

Here are the cams
The one on the left is out of my T2 and is close to the ones that CCM uses now
The one on the right is the one off of a CCM slider frame.
If you notice the flat spots on the cam are in a different spots. They do the same job but push on different areas of the trigger (if I remember right)



Talk to Mel or Rod at CCM (1-877-412-6850) and they should be able to help you out.
__________________
"I shoot pump because it hurts more feelings." -- ryantuomi (heard at Living Legends 2)
"Not everybody understands English... but everyone understands stick" - Big Sexy Medic
"Pumping is about as much a disadvantage for me as shifting is for a Nascar driver" - Ralanti (in an email between ryantuomi, ralanti and I about playing pump)
Thunder Bay Pump Club
Dementia Paintball
MCB Feedback

Last edited by EgoPossum; 07-19-2012 at 06:10 PM.
EgoPossum is offline   Reply With Quote
Old 07-19-2012, 06:33 PM   #5 (permalink)
.67cal Buwwets!
 
crazyorigin's Avatar
 
Join Date: Mar 2008
Location: Central Southern Upstate NY

CCM Fan
I think the cams can be oriented/timed/clocked into different positions so the newer ones may work with a little adjustment. I have never tried this because mine have always been perfect as they are but I am pretty sure they can be turned.
crazyorigin is offline   Reply With Quote
Old 07-19-2012, 08:45 PM   #6 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
Turn the pump rod so that the screw pushed down enough on the at lever
shredxcam is offline   Reply With Quote
Old 07-19-2012, 09:39 PM   #7 (permalink)
Active Member
 
bigcanada00's Avatar
 
Join Date: Jul 2006

Quote:
Originally Posted by shredxcam View Post
Turn the pump rod so that the screw pushed down enough on the at lever
Thanks. I figured that had been the problem but didn't take the time at pandemonium to sort it out. The backside of the slotted AT screw has a sharp edge and as you can see in the photo, over the years it has not only worn through the annodizing of the AT arm, but it's slowly shaved down the metal itself.

Thanks for the comparison on the cam difference between slider & pivot triggers. I'll get in touch with CCM about a replacement.

Ian
bigcanada00 is offline   Reply With Quote
Old 07-19-2012, 11:14 PM   #8 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
Mines thrashed 2. I just bent it so it keeps pressure on it to keep it on place.
I've gone threw triggers from the cam wearing them out

After 100+ cases. Stuff is going to wear eventually
shredxcam is offline   Reply With Quote
Old 07-19-2012, 11:26 PM   #9 (permalink)
Active Member
 
hawaiianking's Avatar
 
Join Date: Mar 2007
Location: Honolulu, Hawaii

The cams are the same but the AT arm is drilled with a different orientation. Call CCM, Rod may still have some. He did when I visited them a few months ago.
hawaiianking is offline   Reply With Quote
Old 07-19-2012, 11:45 PM   #10 (permalink)
Owner of Crazy Cats
 
EgoPossum's Avatar
 
Join Date: Mar 2009
Location: Thunder bay, Ontario, Canada

CCM Fan
If i remember right, It is the positioning of the 2 pins in the cam in relation to the flat spot
__________________
"I shoot pump because it hurts more feelings." -- ryantuomi (heard at Living Legends 2)
"Not everybody understands English... but everyone understands stick" - Big Sexy Medic
"Pumping is about as much a disadvantage for me as shifting is for a Nascar driver" - Ralanti (in an email between ryantuomi, ralanti and I about playing pump)
Thunder Bay Pump Club
Dementia Paintball
MCB Feedback
EgoPossum is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:53 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC