|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|12-26-2012, 01:49 PM||#1 (permalink)|
Old man with a pump
Cram n Jam on my S6
I am thinking about getting a Cram n Jam for my S6. Only question is how do I take off/unscrew my feed neck without destroying it? My gun is in great shape and really don't want to scratch it up.
You can run, but it only means you will die tired.
|12-26-2012, 02:22 PM||#2 (permalink)|
Red=mod, but not Schmitti
Get a ball end Allen set.
Great spirits always encounter violent opposition from mediocre minds-Albert Einstein
Support your local fields. The game you save may ne your own.
"No matter how cynical you become, it's never enough to keep up." ~ Lily Tomlin
|12-26-2012, 05:41 PM||#5 (permalink)|
Hawkeye: Finest Kind
The feedneck of the S6 threads into the body. They can be stubborn to unscrew. Wrap the feedneck in elastic bands. Put the marker between your knees and start twisting. If Mar shows up you are doing it wrong.
Last edited by Marathon; 12-26-2012 at 05:48 PM.
|12-26-2012, 09:26 PM||#8 (permalink)|
Here is what works - if you really don't want to mar it at all - or bend it.
Find a wooden dowel that fits inside the feedneck snugly. I made one for this purpose alone. It is just a wooden plug that is the size of a hopper neck (Around one inch - or about 1-1/16" inch.
Insert this plug, tighten down the collar with the 5/16th allen key - then use a strap wrench.
If you can - warm up the connection of the feedneck to the body with a lighter before doing this - this should loosen the red loc-tite used.
You should be fine with this.
Pumpenstein - NSA National Champions
TF's MCB Trust.
|12-28-2012, 02:37 AM||#10 (permalink)|
ton up boy
Join Date: Mar 2007
I put my rotor in, tightened as tight as could, and used that as leverage.
It was hard even like that, I donīt think one could just unscrew that by hand.
You're on an internet forum.
Every first post is a cry for attention.
|Thread Tools||Search this Thread|