mcarterbrown.com
 

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 03-05-2013, 01:19 PM   #1 (permalink)
Post Whore
 
cougar20th's Avatar
 
Join Date: Apr 2006
Location: Amherst NH

T2 questions

Im considering getting a T2 to turn into a semi so ive got a few questions

1) what is the threading on the front of the gun? 2k autococker?

2) Do you have to use both pumprods to the midblock? Is one ok?

3) what is on the front of the gun to key a frontblock?
__________________
cougar20th is online now   Reply With Quote
Old 03-05-2013, 01:35 PM   #2 (permalink)
Post Whore
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
AKA Fan
threading is 2k

there have been semi T2's with a single ram.. personally i think a single ram is a cop out.. but dual ram cockers dont really exist

there is nothing to hold a front block in place, the front edge is just a rounded out

here are the main issues you are going to have with your project

the ASA doesnt have provisions for a timing rod

the front of the body will need to be made flat (not nesscary, but if you want to keep a front block on steady, it would be worth the trouble)

and the body is rounded on the bottom, so you will either need an adapter plate, or to modify your frame (but that might make the sear go too high into the body). or youll need to cutsom make a frame.. as theres NOTHING from CCM that has a slider plate, and a rounded top

best of luck to you. look forward to seeing what you come up with

Tracker
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Old 03-05-2013, 08:01 PM   #3 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
Mini it and e use mini front block
shredxcam is online now   Reply With Quote
Old 03-05-2013, 08:13 PM   #4 (permalink)
Sniper
 
hoov7888's Avatar
 
Join Date: Apr 2011
Location: southern California

CCM Fan
I would contact Mel and see if she could help you out with a special order. Its a long shot but ccm is a great company and I wouldn't be surprised if they helped you out or pointed you in the right direction. Best of luck.

....post pics when finished!
hoov7888 is offline   Reply With Quote
Old 03-05-2013, 08:15 PM   #5 (permalink)
Blue - Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Quote:
Originally Posted by cougar20th View Post
Im considering getting a T2 to turn into a semi so ive got a few questions
This is where I stopped reading and you died to me.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 03-06-2013, 01:38 PM   #6 (permalink)
Seasoned Member
 
Christacular's Avatar
 
Join Date: Sep 2010
Location: Los Angeles, CA

Quote:
Originally Posted by Tracker View Post
threading is 2k

there have been semi T2's with a single ram.. personally i think a single ram is a cop out.. but dual ram cockers dont really exist

there is nothing to hold a front block in place, the front edge is just a rounded out

here are the main issues you are going to have with your project

the ASA doesnt have provisions for a timing rod

the front of the body will need to be made flat (not nesscary, but if you want to keep a front block on steady, it would be worth the trouble)

and the body is rounded on the bottom, so you will either need an adapter plate, or to modify your frame (but that might make the sear go too high into the body). or youll need to cutsom make a frame.. as theres NOTHING from CCM that has a slider plate, and a rounded top

best of luck to you. look forward to seeing what you come up with

Tracker
He could also stick with the stock frame, slap an MQ in there, and just put an e-frontblock on the front and have a single trigger, semi, MQ'd, T2
Christacular is offline   Reply With Quote
Old 03-11-2013, 03:24 PM   #7 (permalink)
Yield and Overcome...
 
Dr. PhunkyPants's Avatar
 
Join Date: Apr 2008

CCM Fan
Welcome to MCB. Good luck with your project.
Dr. PhunkyPants is offline   Reply With Quote
Old 03-12-2013, 12:13 PM   #8 (permalink)
Blue - Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Quote:
Originally Posted by Dr. PhunkyPants View Post
Welcome to MCB. Good luck with your project.
Damn......


TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 03-12-2013, 12:22 PM   #9 (permalink)
Post Whore
 
cougar20th's Avatar
 
Join Date: Apr 2006
Location: Amherst NH

I just have no experience with a T2. And none of my friend have one I can borrow anymore. Figured I would get alittle background on them before spending any money.
__________________

Last edited by cougar20th; 03-12-2013 at 12:26 PM.
cougar20th is online now   Reply With Quote
Old 03-12-2013, 02:08 PM   #10 (permalink)
Post Whore
 
Lindsay's Avatar
 
Join Date: Nov 2007
Location: Lawrence MA

Do you need to see one again before you buy a new one or what?
__________________
phantom feed
MCB feedback
Lindsay is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 07:27 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC