Approx. CCM reg pressure?

Andrewliu6294 · 03-29-2008, 10:54 PM

Is there any way of telling the approximate pressure of the CCM reg (newest style milling, on S6's) based on number of turns from flush?

I know you can do this for palmers regs, but I know nothing for these.

I dont have a gauge port.

hvacman250 · 03-29-2008, 11:08 PM

Flush is ~300-350 (ish)...kinda, I think.

Most CCMs I have seen are near flush plus a half turn or so in.

Talfuchre · 03-31-2008, 10:05 PM

Flush is about 300.

TF

03-29-2008, 10:54 PM	#1 (permalink)
Andrewliu6294 Active Member Join Date: Aug 2007	Approx. CCM reg pressure? Is there any way of telling the approximate pressure of the CCM reg (newest style milling, on S6's) based on number of turns from flush? I know you can do this for palmers regs, but I know nothing for these. I dont have a gauge port.

03-29-2008, 11:08 PM	#2 (permalink)
hvacman250 Seasoned Member Join Date: Nov 2006	Flush is ~300-350 (ish)...kinda, I think. Most CCMs I have seen are near flush plus a half turn or so in. __________________ Feedback

03-31-2008, 10:05 PM	#3 (permalink)
Talfuchre Brown Chicken, Brown Cow. Join Date: May 2006	Flush is about 300. TF __________________ Pumpenstein - NSA National Champions 2006 TF's MCB Trust.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search