Paintball

[Talfuchre]

Thanks to Rod from CCM I now have a complete parts kit.





I have way to many parts for the average user however - so I decided to build a list of necessities that should cure all of your CCM needs for your personal markers.

I will break these lists into two categories - the SS25 / Series 6 Prototype list and a second list for the Series 5, Series 5 Basic, and Series 6 markers. Items in italics are not necessary but nice to have.

SS25 / S6P List:

SS25 Valve Body (1)
Valve Body O-Rings (4) N70 015
Valve Plug O-Ring (1)
Spring Detent (For SS25) (1)
Timmy Rubber Detents (For S6P) (2)
Pump Kit O-Rings (2) N70 113
Auto Trigger Screw (1)
Grip Frame Screws (2) be sure to get one for the front and one for the rear - they are different.
IVG O Ring (1) N70 013
Main and Valve Springs (1 Each)
Valve Stem Assembly (1)
Valve Stem o-ring (2) N90 007
Bolt Pin O-Ring (1) N90 009
Hammer Nylon Set Screw (2)
Cocking Rod Bumper (4) these are also used in the hammer
Regulator Half O-ring (1) N70 017
Reg Piston O-Ring (2) N70 113
Regulator Poppit O-ring (2) N90 006
If you use a CCM ASA - Reg ASA o-ring (2) N70 007

Tools needed:

Full set of high quality allen keys
Adjustable Wrench
Needle nose pliers
O-Ring pick
Dow 33 Grease (H8tr sauce is nice too)
KC Concepts Blue oil (other high quality oil works well)
1/2 dowel cut at 1 foot length (this is used to push out your valve body if needed)
Blue and Red Loc-Tite

S5 / S5B / S6P

Series 5 Valve Body (1)
Valve Body O-Rings (1) N70 011
Spring Detent (For S5, S5B) (1)
Timmy Rubber Detents (For S6P) (2)
Pump Kit O-Rings (for S5) (2) N70 113
Pump Kit O-Rings (For S6) (2) N70 015
Auto Trigger Screw (1)
Grip Frame Screws (2) be sure to get one for the front and one for the rear - they are different.
IVG O Ring (1) N70 013
Main and Valve Springs (1 Each)
Valve Stem Assembly (1)
Valve Stem o-ring (2) N90 007
Bolt Pin O-Ring (1) N90 009
Hammer Nylon Set Screw (2)
Cocking Rod Bumper (4) these are also used in the hammer
Regulator Half O-ring (1) N70 017
Reg Piston O-Ring (2) N70 113
Regulator Poppit O-ring (2) N90 006
If you use a CCM ASA - Reg ASA o-ring (2) N70 007

Tools Needed:

Full set of high quality allen keys
'Cocker Valve Removal Tool
Adjustable Wrench
Needle nose pliers
O-Ring pick
Dow 33 Grease (H8tr sauce is nice too)
KC Concepts Blue oil (other high quality oil works well)
Blue and Red Loc-Tite

Here is how this parts kit might look when done:






I think this is complete - this should have you in good condition for anything that the manual says you need to fix. Call CCM for any of these parts - they have a full supply and I am sure will be more than happy to help you. I have also included the o-rings sizes as I knew them (the information was also gleaned from Rod at CCM) - you should be able to find these at a local parts store.

Please post up anything I might have missed and I will add.

TF

[CCmachinist]

hey,TF.If you have any extra parts I would like to buy some.

[CCM CHICK]

Shoot man... your parts kit look better than ours! Good deal!

[aqua_scummm]

That's a lot of individual parts


No valve tool needed for the S5/S6 etc?

[Talfuchre]

Good call. I will add it.

Bill,

Call me if you want - I have a great deal on some parts. I don't have a parts kit - I have 'inventory'.

TF

[Milkshake]

Is that for the new s6 style SS25? or the older ones? Duh, just really read the post, brain dead I guess. Thanks, this will be a big help.

[hvacman250]

Originally Posted by sp8nsc

Is that for the new s6 style SS25? or the older ones?

You're gonna have a mix between the two.

And Tal, you have OCD real bad CCM guns dont break; why do you need a parts kit?