mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Custom Projects / Custom Questions (http://www.mcarterbrown.com/forums/custom-projects-custom-questions/)
-   -   project "why not" update (http://www.mcarterbrown.com/forums/custom-projects-custom-questions/2238-project-why-not-update.html)

K_Obeastly 08-06-2006 07:24 PM

project "why not" update
 
well, many many months ago I had made a board for my BKO for fun and a class project. I used a parallax basic stamp. It was a bit too large to get into the grip. If anyone is interested I can still dig out the old code for it, it had many modes and switching between them was done by turning it off then holding the trigger in while you turned it back on. each power up would cycle to the next mode and it would go back to the first mode if you didn't hold the trigger while you turned it on.

http://f10.putfile.com/thumb/8/21719092619.jpg


then many more months later I decided to go with a closed bolt pump BKO

http://f10.putfile.com/thumb/7/19416522355.jpg

http://f10.putfile.com/thumb/7/19416434345.jpg

and just the other day I gave up waiting for my local Parker distributer to find a manifold for my old skinner solenoid (and I didn't want to pay $26 from ASP, I don't think hes a bad guy I just thought that was a bit pricey and with what I have been through with Parker I would charge that much too) so I made my own. Now I just gotta sit down and make a new board for controlling the two solenoids and make a housing for it.

The pump just pushes a small push button that is on the small plate behind the pump handle.

any black or green marks are just reference points for myself during the work. Kind of slops it up a bit but I really don't care about the looks of this beast in the end... after all, I bolted a big piece of plastic on the side...

the bolt is one of edwins tribal bolts that has been sanded down and drilled for the pin to go in the side.

http://f10.putfile.com/thumb/8/21719172367.jpg
http://f10.putfile.com/thumb/8/21719180977.jpg
http://f10.putfile.com/thumb/8/21719174616.jpg
http://f10.putfile.com/thumb/8/21719184960.jpg

stockman 08-06-2006 10:20 PM

Having seen this "thing" in person it is nuts. The "pump stroke" is less than a mm. I can't wait for it to get finished Kevin.

K_Obeastly 08-07-2006 03:36 PM

for some reason I can't get any of my videos with the old board to work with putfile. You could see/hear a huge difference between the full auto and doc modes.

Doc mode was made for and because of a certain person who has a love for over shooting. It was the same as a regular full auto but + 5ms on the dwell.
It was made after watching doc light up a youngster after the youngster bunkered him. It wasn't really the kids doing, the kid was in a bunker and doc moved to that bunker and then the youngin popped over the top and shot him once.


All times are GMT -4. The time now is 03:57 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC