Lever Action Trracer - Page 5

a_sock · 10-25-2007, 07:44 AM

im really trying to learn how to do this to a tracer. could you explain how you did it?

drg · 10-25-2007, 08:02 AM

Quote:

Originally Posted by Drum

Take it easy, Francis.

I believe it's "lighten up, francis" ...

RealtorTommy · 10-25-2007, 10:27 AM

I would be interested in a 30-30 winchester/marlin lever action looking type project....something different then just a one piece stock.....

BigOldSkool · 10-25-2007, 04:54 PM

Sabre... Im taking you to court on lost sleep and damages

Just kidding... You were the final push on a long dead project lever action Spartan I was working on.

Marthon building I finished the trigger group and gun... it works with a mock lever. Now I have to make a stock then make a lever to fit said stock. Being Im off and its a cold and dreary NY fall day Im going to spend most of it inside messing with scrap oak

NoZebra · 10-31-2007, 03:32 AM

I'm almost embarassed to post my attempt at a lever action conversion. Found some sign board that had been sprayed up out in the garage, grabbed the dremel, and had at it. Not terrible for one night, and I can always go back to the bolt action.

Custom Cowboy · 10-31-2007, 07:49 PM

I have dibbs on the next one built guys. I called it before the pics were posted because they and the video were taken at my place.
HA!
I just wanted to brag because mine will be next(hopefully soon too).
Saber, my Trracer is being taken out of it's fiber stock. Its ready for wood.

Saber · 11-08-2007, 02:47 AM

OK, so I figured that it was time to start making improvements on what is now my prototype..

First is an updated feed tube.. ya, ya I know "It looks likes the crowdbuster feed setup" Oh well it works and thats how I would have done it anyway. All aluminum with Delrin plugs and so far much cleaner than the last.. I'm still having probs figuring a good way to mount the feed tube.. OK well at least one I like.. A new body sleeve was created to fit the feed tube.

I still have the front clamps to build and clean things up..

The new trigger assembly and Lever will come next week when the rest of my parts get here..

For those that want a lever for this kind of project. I might be able to help.. I will be doing a set of levers from a water-jet facility in the near future..

Skippy · 11-08-2007, 05:11 PM

Sweet. I like that feed gate design, simple yet effective. Planning on replacing that pipe strap at the muzzle with something else?
Now we just need a video of you twirl cocking this badboy.

Walking_Target · 11-08-2007, 05:17 PM

nice!

I'm just waiting on my stock and some copper bits to finish mine

pizzadude · 11-10-2007, 06:05 AM

Quote:

Originally Posted by Saber

I'm still having probs figuring a good way to mount the feed tube.. OK well at least one I like.. A new body sleeve was created to fit the feed tube.

I was trying to make a coupling for one of my markers and it was taking me ages to find something I liked: then I found these on eBay - 25mm/1" figure '8' scope mounts.

ux_a07070200ux0056_ux_g.jpg

67459439_tp.jpg

They may well work for you too - to connect the feed tube to the barrel at the muzzle end.

10-25-2007, 07:44 AM	#41 (permalink)
a_sock Active Member Join Date: Oct 2007	im really trying to learn how to do this to a tracer. could you explain how you did it? __________________ (\__/) (='.'=) (")_(")..COPY BUNNY INTO SIG TO HELP HIM ACHIEVE WORLD DOMINATION

10-25-2007, 10:27 AM	#43 (permalink)
RealtorTommy Team On Target Join Date: Sep 2007 Location: Central Florida	I would be interested in a 30-30 winchester/marlin lever action looking type project....something different then just a one piece stock..... __________________ Tommy "Realtor" Long Team On Target Sponsorship/Promotions Team On Target sponsored by www.teamontargetpb.com www.smartparts.com www.techtpaintball.com www.flurryindustries.com www.customhomedivision.com www.scenariodreams.com Cannibalistic Paintball, On Target Army and Navy, Blackrain Paintball Grenades, BallBreakers Paintball

10-25-2007, 04:54 PM	#44 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY	Sabre... Im taking you to court on lost sleep and damages Just kidding... You were the final push on a long dead project lever action Spartan I was working on. Marthon building I finished the trigger group and gun... it works with a mock lever. Now I have to make a stock then make a lever to fit said stock. Being Im off and its a cold and dreary NY fall day Im going to spend most of it inside messing with scrap oak __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

11-08-2007, 02:47 AM	#47 (permalink)
Saber Rec Poster Join Date: Sep 2007	Update OK, so I figured that it was time to start making improvements on what is now my prototype.. First is an updated feed tube.. ya, ya I know "It looks likes the crowdbuster feed setup" Oh well it works and thats how I would have done it anyway. All aluminum with Delrin plugs and so far much cleaner than the last.. I'm still having probs figuring a good way to mount the feed tube.. OK well at least one I like.. A new body sleeve was created to fit the feed tube. I still have the front clamps to build and clean things up.. The new trigger assembly and Lever will come next week when the rest of my parts get here.. For those that want a lever for this kind of project. I might be able to help.. I will be doing a set of levers from a water-jet facility in the near future..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-08-2007, 05:11 PM	#48 (permalink)
Skippy KP: Kills Paycheques Join Date: Nov 2007 Location: Toronto, ON	Sweet. I like that feed gate design, simple yet effective. Planning on replacing that pipe strap at the muzzle with something else? Now we just need a video of you twirl cocking this badboy.